Erosive wear properties of unidirectional carbon fiber reinforced PEEK composites

被引：45
|
作者：
Pei, Xianqiang [1 ]
Friedrich, Klaus [1 ,2 ]
机构：
[1] Tech Univ Kaiserslautern, Inst Composite Mat IVW GmbH, D-67663 Kaiserslautern, Germany
[2] King Saud Univ, Coll Engn, CEREM, Riyadh, Saudi Arabia
来源：
TRIBOLOGY INTERNATIONAL | 2012年 / 55卷
关键词：
Erosive wear; CF/PEEK composite; Surface temperature; Cross-sectional analysis; SOLID-PARTICLE EROSION; BEHAVIOR;
D O I：
10.1016/j.triboint.2012.05.020
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The erosive wear properties of unidirectional carbon fiber (CF) reinforced polyetheretherketone (PEEK) composites were studied. A semi-ductile erosive wear manner was found regardless of the CF orientation. Wear mechanism analysis revealed that both cutting and deformation mechanisms existed in the erosion of the composites, although different damaging forms were involved depending on the impingement angles and CF orientation. To give further support on the erosion mechanisms, a special procedure was designed to observe the cross-sectional surface of the eroded composites, and the surface temperature variation was registered. It increased with increasing impingement angle, indicating higher energy dissipation by deformation, which is consistent with the revealed shift of the main erosive wear mechanism from cutting to deformation and "wholesale" fiber fracture. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：135 / 140
页数：6
相关论文
共 50 条
  • [1] Friction and wear properties of carbon fiber reinforced PEEK composites under water lubrication
    Zhang, Jianguo
    Cai, Chilan
    [J]. MECHANICAL, MATERIALS AND MANUFACTURING ENGINEERING, PTS 1-3, 2011, 66-68 : 1051 - +
  • [2] EROSIVE WEAR OF FIBROUS PEEK COMPOSITES
    LHYMN, C
    LHYMN, YO
    [J]. ADVANCED MATERIALS : THE BIG PAYOFF, 1989, 21 : 720 - 729
  • [3] Erosive wear of unidirectional carbon fibre reinforced polyetherimide composite
    Arjula, Suresh
    Harsha, A. P.
    Ghosh, M. K.
    [J]. MATERIALS LETTERS, 2008, 62 (17-18) : 3246 - 3249
  • [4] Study on mechanical properties of unidirectional continuous carbon fiber-reinforced PEEK composites fabricated by the wrapped yarn method
    Xu, Zhiping
    Zhang, Mei
    Gao, ShuoHui
    Wang, Guibin
    Zhang, Shuling
    Luan, Jiashuang
    [J]. POLYMER COMPOSITES, 2019, 40 (01) : 56 - 69
  • [5] Wear behavior of carbon fiber reinforced peek composites in total joint replacements.
    Wang, A
    Lin, R
    Stark, C
    Dumbleton, JH
    [J]. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1998, 216 : U892 - U892
  • [6] ON THE WEAR BEHAVIOR OF SHORT-FIBER-REINFORCED PEEK COMPOSITES
    VOSS, H
    FRIEDRICH, K
    [J]. WEAR, 1987, 116 (01) : 1 - 18
  • [7] Friction and wear properties of carbon fiber reinforced polypropylene composites
    Li, Jian
    Cai, Chilan
    [J]. MATERIALS AND DESIGN, PTS 1-3, 2011, 284-286 : 2380 - 2383
  • [8] The Addition of Carbon Nanotube on the Tensile Properties of Carbon Fiber-Reinforced PEEK Composites
    Li, J.
    Zhang, L. Q.
    [J]. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2009, 48 (11) : 1176 - 1179
  • [9] Friction and wear properties of UHMWPE composites reinforced with carbon fiber
    Xiong, DS
    [J]. MATERIALS LETTERS, 2005, 59 (2-3) : 175 - 179
  • [10] EFFECT OF COUNTERCOMPONENT ROUGHNESS ON THE WEAR OF PEEK AND SHORT-FIBER REINFORCED PEEK COMPOSITES
    BROCKMULLER, K
    FRIEDRICH, K
    MAISNER, M
    [J]. KUNSTSTOFFE-GERMAN PLASTICS, 1990, 80 (06): : 701 - 705
12345