Discussion of defect analysis of a Ti-6Al-4V alloy forging ring

被引：2

作者：

Huang, Zhanghong ^{[1
]}

Qu, Henglei ^{[1
]}

Ye, Hongchuan ^{[1
]}

Deng, Chao ^{[1
]}

Wu, Hua ^{[1
]}

Ma, Hongzheng ^{[1
]}

Yang, Jianchao ^{[1
]}

机构：

[1] Western Titanium Technol Co Ltd, Xian Econ & Technol Dev Zone, Xian 710201, Shanxi, Peoples R China

来源：

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH | 2012年 / 103卷 / 06期

关键词：

Ti-6Al-4V alloy; Forging ring; Defect; Microstructure;

D O I：

10.3139/146.110784

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

An open crack was found in a Ti-6Al-4V alloy forging ring. Optical observation, scanning electron microscopy analysis, energy-dispersive X-ray spectroscopy, hardness test and X-ray photoelectron spectroscopy were applied to find out the reason. It was found there was an obvious transition zone from the edge of the crack to the matrix on one side of the crack, where the shape and size of the microstructure changed from big block to elongated wattle. In addition, the microstructure inside the crack appeared non-compact and porous. Microhardness tests showed that the hardness of the area near the crack was remarkably higher than that of matrix. The results of energy-dispersive X-ray spectroscopy showed that the content of Al and V was much smaller near the crack compared to the matrix. The surface of the crack is basically composed of Ti, Al and V, and no other elements were found in the precision range. X-ray photoelectron spectroscopy results showed that the blocky a-phase area near the crack contained oxygen, carbon and nitrogen. However, no carbon and nitrogen were found in the matrix and the oxygen content was lower.

引用

页码：790 / 793

页数：4

共 50 条

[1] ANALYSIS OF DEFORMATION AND MICROSTRUCTURAL EVOLUTION IN THE HOT FORGING OF THE Ti-6Al-4V ALLOY
Kukuryk, M.
ARCHIVES OF METALLURGY AND MATERIALS, 2015, 60 (02) : 597 - 604
[2] Mechanical properties anisotropy of Ti-6Al-4V alloy fabricated by ,β forging
Weng, Han-bo
Huang, Sen-sen
Yang, Jie
Qi, Min
Ma, Ying-jie
Wang, Yu-xiang
Xu, Dao-kui
Qiu, Jian-ke
Lei, Jia-feng
Gong, Bin
Yang, Rui
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2023, 33 (11) : 3348 - 3363
[3] STRUCTURE AND PITTING CORROSION OF Ti-6Al-4V ALLOY AND Ti-6Al-4V WELDS
Ferdinandov, Nikolay Vasilev
Gospodinov, Danail Dimitrov
Ilieva, Mariana Dimitrova
Radev, Rossen Hristov
PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND SYSTEMS, 2018, : 325 - 330
[4] Numerical Analysis of Unconventional Forging Process of Hollowed Shaft from Ti-6Al-4V Alloy
GONTARZ Andrzej
PATER Zbigniew
TOFIL Arkadiusz
Journal of Shanghai Jiaotong University(Science), 2011, 16 (02) : 157 - 161
[5] Numerical analysis of unconventional forging process of hollowed shaft from Ti-6Al-4V alloy
Gontarz A.
Pater Z.
Tofil A.
Journal of Shanghai Jiaotong University (Science), 2011, 16 (2) : 157 - 161
[6] DEFORMATION CHARACTERISTICS OF TI-6AL-4V ALLOY UNDER ISOTHERMAL FORGING CONDITIONS
CHEN, CC
COYNE, JE
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1976, 7 (12): : 1931 - 1941
[7] Effect of forging processes on the microstructure and texture distribution of Ti-6Al-4V alloy
Li, Wei
Peng, Tao
Zhang, Mai-Cang
Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2015, 37 (03): : 345 - 352
[8] Consolidation of Titanium, and Ti-6Al-4V Alloy Powders by Powder Compact Forging
Zhang, Deliang
Raynova, Stiliana
Nadakuduru, Vijay
Cao, Peng
Gabbitas, Brian
Robinson, Barry
LIGHT METALS TECHNOLOGY 2009, 2009, 618-619 : 513 - +
[9] Siliconizing of Ti-6Al-4V alloy
Zhang, Yaming
Wang, Weilin
Zhou, Longliang
Li, Tiefan
Chen, Chongwei
Jinshu Rechuli/Heat Treatment of Metals, 1993, (01): : 21 - 24
[10] MACHINABILITY OF TI-6AL-4V ALLOY
NAKAMURA, S
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1648 - 1648

← 1 2 3 4 5 →