A Novel Way to Fabricate Carbon Nanotubes Reinforced Copper Matrix Composites by Friction Stir Processing

被引：6
|
作者：
Chen, Wenliang [1 ]
Huang, Chunping [1 ]
Ke, Liming [1 ]
机构：
[1] Nanchang Hangkong Univ, Natl Def Key Discipline Lab Light Alloy Proc Sci, Nanchang 330063, Peoples R China
来源：
CHEMICAL ENGINEERING AND MATERIAL PROPERTIES, PTS 1 AND 2 | 2012年 / 391-392卷
关键词：
Friction stir processing; Carbon nanotubes; Copper matrix composites; Microstructure; Microhardness; Conductivity; STRAIN RATE SUPERPLASTICITY; IN-SITU; ALLOY; BEHAVIOR;
D O I：
10.4028/www.scientific.net/AMR.391-392.524
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
Carbon nanotubes(CNTs) reinforced copper matrix composites were successfully produced by Friction Stir Processing (FSP). The effect of applying multiple FSP passes on the forming of composites was studied, the microstructure, microhardness and conductivity of the good forming composite were analyzed. The experimental results showed that CNTs uniformly distributed and good forming composite can be obtained by three FSP passes. Compared to the parent material, the grain size of the composite has significantly refined, and the microhardness of the composite has also greatly improved, but the conductivity of the composite has a small decrease.
引用
收藏
页码：524 / 529
页数：6
相关论文
共 50 条
  • [1] A novel way to produce bulk SiCp reinforced aluminum metal matrix composites by friction stir processing
    Wang, Wei
    Shi, Qing-yu
    Liu, Peng
    Li, Hong-ke
    Li, Ting
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (04) : 2099 - 2103
  • [2] STUDY OF CARBON NANOTUBES ON WEAR PERFORMANCE OF ALUMINUM MATRIX COMPOSITES BY FRICTION STIR PROCESSING
    Xu Weiping
    Ke Liming
    Xing Li
    Zhang Zhifeng
    Zhao Xia
    PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE 2011, VOL 2, 2011, : 307 - 311
  • [3] Novel synthesizing and characterization of copper matrix composites reinforced with carbon nanotubes
    Wang, Hu
    Zhang, Zhao-Hui
    Zhang, Hong-Mei
    Hu, Zheng-Yang
    Li, Sheng-Lin
    Cheng, Xing-Wang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 696 : 80 - 89
  • [4] Friction stir welding of multi-walled carbon nanotubes reinforced Al matrix composites
    Lee, Seung-Joon
    Shin, Se Eun
    Sun, Yufeng
    Fujii, Hidetoshi
    Park, Yongbum
    MATERIALS CHARACTERIZATION, 2018, 145 : 653 - 663
  • [5] Microstructure and mechanical property of multi-walled carbon nanotubes reinforced aluminum matrix composites fabricated by friction stir processing
    Liu, Qiang
    Ke, Liming
    Liu, Fencheng
    Huang, Chunping
    Xing, Li
    MATERIALS & DESIGN, 2013, 45 : 343 - 348
  • [6] Friction Stir Processing of Multiwalled Carbon Nanotubes Reinforced Al-Mg-Si Alloy Composites
    Singh P.
    Sahai A.
    Sharma R.S.
    Journal of The Institution of Engineers (India): Series C, 2023, 104 (04) : 749 - 766
  • [7] A Novel Melt Processing for Mg Matrix Composites Reinforced by Multiwalled Carbon Nanotubes
    H.L.Shi
    X.J.Wang
    C.L.Zhang
    C.D.Li
    C.Ding
    K.Wu
    X.S.Hu
    JournalofMaterialsScience&Technology, 2016, 32 (12) : 1303 - 1308
  • [8] A Novel Melt Processing for Mg Matrix Composites Reinforced by Multiwalled Carbon Nanotubes
    Shi, H. L.
    Wang, X. J.
    Zhang, C. L.
    Li, C. D.
    Ding, C.
    Wu, K.
    Hu, X. S.
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2016, 32 (12) : 1303 - 1308
  • [9] Friction and wear properties of carbon nanotubes reinforced copper matrix composites with and without electric current
    Xu, Wei
    Hu, Rui
    Gao, Yuan
    Kou, Hong-Chao
    Li, Jin-Shan
    Fu, Heng-Zhi
    Mocaxue Xuebao/Tribology, 2010, 30 (03): : 303 - 307
  • [10] Friction and wear properties of copper matrix composites reinforced by tungsten-coated carbon nanotubes
    NIE Junhuia
    Rare Metals, 2011, 30 (06) : 657 - 663
12345