Characteristics of Mineralizing Fluids of the Darreh-Zerreshk and Ali-Abad Porphyry Copper Deposits, Central Iran, Determined by Fluid Inclusion Microthermometry

The Darreh-Zereshk (DZ) and Ali-Abad (AB) porphyry copper deposits are located in southwest of the Yazd city, central Iran. These deposits occur in granitoid intrusions, ranging in composition from quartz monzodiorite through granodiorite to granite. The ore-hosting intrusions exhibit intense hydrofracturing that lead to the formation of quartz-sulfide veinlets. Fluid inclusions in hydrothermal quartz in these deposits are classified as a mono-phase vapor type (Type I), liquid-rich two phase (liquid+vapor) type (Type IIA), vapor-rich two phase (vapor+liquid) type (Type IIB), and multi-phase (liquid+vapor+halite+sylvite+hematite+chalcopyrite and pyrite) type (Types III). Homogenization temperatures (Th) and salinity data are presented for fluid inclusions from hydrothermal quartz veinlets associated with potassic alteration and other varieties of hypogene mineralization. Ore precipitation occurred between 150 degrees to >600 degrees C from low to very high salinity (1.173.9 wt% NaCl equivalent) aqueous fluids. Two stages of hydrothermal activity characterized are recognized; one which shows relatively high Th and lower salinity fluid (Type IIIa; Th(L-V) > Tm(NaCl)); and one which shows lower Th and higher salinity (Type IIIb; Th(L-V) < Tm(NaCl)). The high Th(L-V) and salinities of Type IIIa inclusions are interpreted to represent the initial existence of a dense fluid of magmatic origin. The coexistence of Type IIIb, Type I and Type IIB fluid inclusions suggest that these inclusions resulted either from trapping of boiling fluids and/or represent two immiscible fluids. These processes probably occurred as the result of pressure fluctuations from lithostatic to hydrostatic conditions under a pressure of 200 to 300 bar. Dilution of these early fluids by meteoritic water resulted in lower temperatures and low to moderate salinity (<20 wt% NaCl equiv.) fluids (Type IIA). Fluid inclusion analysis reveals that the hydrothermal fluid, which formed mineralized quartz veinlets in the rocks with potassic alteration, had temperatures of approximate to 500 degrees C and salinity approximate to 50wt% NaCl equiv. Cryogenic SEM-EDS analyses of frozen and decrepitated ore-bearing fluids trapped in the inclusions indicate the fluids were dominated with NaCl, and KCl with minor CaCl2.