Mixture Weibull distributions for fitting failure times data

Two and three-parameter Weibull distribution is considered a flexible and useful distribution for adequately representing unimodal frequency distribution of failure times, but sometimes these distributions do not accurately represent the failure times data set. In such cases mixture of two or three Weibull distributions developed here provide very good fits for these mixture distributions. In this paper a mixture of two and three Weibull distributions were used to analyze the data of failure times. The suitability of the distributions judged from the various tests-of-fit commonly used in the specialized literature on failure times data. The shapes of the density and hazard functions Were used in addition to another procedure using goodness of fit tests based on the empirical distribution function are used to find the suitability fits of the data of failure times. These measurements are; coefficient of determination R-2. sum of squares due to error SSE, mean square error MSE and root mean square error RMSE. Maximum likelihood estimation MLE was used to estimate the parameters. We found that two- and three-component mixture Weibull distribution provides suitable fits for the failure time data studied based on the shapes of density and hazard functions. A high value of R-2 and low SSE, MSE and RMSE were obtained for five cases indicating suitable fit. It was concluded that the mixture Weibull distributions provide very flexible models for the proposed failure times data. It was also found that increasing the number of components resulting in increasing the number of parameters can have a negative effect on the values of R-2, SSE, MSE and RMSE. (C) 2013 Elsevier Inc. All rights reserved.