VaRTM process of composites using porous mold

被引：15

作者：

Yokozeki, Tomohiro ^{[1
]}

Kobayashi, Yayoi ^{[1
]}

Aoki, Takahira ^{[1
]}

Yoshida, Daishiro ^{[2
]}

Hirata, Takuya ^{[2
]}

机构：

[1] Univ Tokyo, Dept Aeronaut & Astronaut, Bunkyo Ku, Tokyo 1138656, Japan

[2] Hokuto Corp, Komaki, Aichi 4850823, Japan

来源：

ADVANCED COMPOSITE MATERIALS | 2013年 / 22卷 / 02期

关键词：

composite manufacturing; VaRTM; porous mold; mechanical properties;

D O I：

10.1080/09243046.2013.777173

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

This paper introduces Porous Mold Process (PMP) as a reliable low-cost manufacturing process of fiber-reinforced composites. PMP using porous aluminum is applied to the vacuum-assisted resin transfer molding (VaRTM) process of carbon fiber reinforced plastics (CFRPs). Experimental evaluation on resin infusion behavior and quality and mechanical properties of the cured plates is performed with varying the dimensions of the plates. The results show that quality and mechanical properties of the cured plates using PMP are satisfactory, stable, and almost independent of plate dimensions. It is concluded that PMP provides a reliable and knowhow-less resin infusion process of composite materials.

引用

页码：99 / 107

页数：9

共 50 条

[1] VARTM process of composites using double-bag air cushion method
Chang, Chih-Yuan
Huang, Jen-Tsung
[J]. TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, 2022, 47 (01) : 131 - 142
[2] Influence of process Parameters on Mechanical Properties of Composites Fabricated by VARTM Process
Sun, Zuli
Guo, Ming-en
Li, Jun
Luan, Guiqing
[J]. ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION III, PTS 1 AND 2, 2012, 201-202 : 1084 - +
[3] Investigation into property control of VaRTM composites by resin infusion process
Yokozeki, Tomohiro
Yamazaki, Wataru
Kobayashi, Yayoi
[J]. ADVANCED COMPOSITE MATERIALS, 2015, 24 (06) : 495 - 507
[4] Glass Fiber Permeability Using the VARTM Process
Kim, Yun-Hae
Yang, Dong-Hun
Bae, Chang-Won
Moon, Kyung-Man
Jo, Young-Dae
Yoon, Sung-Won
An, Hee-Beom
[J]. MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 1772 - +
[5] Batch Production Using the Full Mold Process with Porous Patterns.
Standke, Wolfgang
[J]. Giesserei, 1987, 74 (01): : 4 - 12
[6] Simulation and experimental validation for the mold-filling process of VARTM based on mixed grid approach
Yang, Bo
Wang, Shilong
Bi, Fengyang
[J]. Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2017, 34 (08): : 1736 - 1744
[7] Carbon fiber permeability characterization using VARTM process
Gajjar, Tushar
Shah, Dhaval B.
Joshi, Shashikant J.
Patel, K. M.
[J]. MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 1560 - 1563
[8] Effects of vacuum pressure, inlet pressure, and mold temperature on the void content, volume fraction of polyester/e-glass fiber composites manufactured with VARTM process
Kedari, Vishwanath R.
Farah, Basil I.
Hsiao, Kuang-Ting
[J]. JOURNAL OF COMPOSITE MATERIALS, 2011, 45 (26) : 2727 - 2742
[9] Manufacturing of fiber reinforced polymer by using VARTM process: A review
Tamakuwala, Vigneshkumar Ramdas
[J]. MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 987 - 993
[10] VARTM process model development
Loos, AC
Sayre, J
McGrane, R
Grimsley, B
[J]. 2001: A MATERIALS AND PROCESSES ODYSSEY, BOOKS 1 AND 2, 2001, 46 : 1049 - 1060

← 1 2 3 4 5 →