Influence of Bolt Joint on Dynamic Characteristic of Linear Rolling Guide

被引：1
|
作者：
Li, Xiaopeng [1 ]
Liang, Yamin [1 ]
Yang, Haotian [1 ]
Ju, Xing [1 ]
Zhao, Guanghui [1 ]
机构：
[1] Northeastern Univ, Sch Mech Engn & Automat, Shenyang, Peoples R China
来源：
MECHATRONICS AND COMPUTATIONAL MECHANICS | 2013年 / 307卷
关键词：
Linear rolling guide; Bolt joint; Finite element analysis; Modal analysis;
D O I：
10.4028/www.scientific.net/AMM.307.182
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Bolt joint has an important influence on the dynamic characteristic of guide rail. Linear rolling guide is chosen as the research object in this paper. Firstly, the dynamic model of the linear rolling guide joint surface is established and its natural frequency is figured out. Then we use ANSYS to make finite element analysis of guide on whether the bolt joint is considered or not. Finally, the validity of finite element model is verified through modal test. By comparing the results of the two kinds of finite element analysis with the theoretical result, we can conclude that the finite element model considering the bolts joint is closer to the theoretical result. So the bolt joint has a great influence on the dynamic characteristics of linear rolling guide. This paper provides the theoretical guide for the research on the bolt joint.
引用
收藏
页码：182 / 185
页数：4
相关论文
共 50 条
  • [1] Dynamic Characteristics of Linear Rolling Guide Joint Based on Contact Stiffness
    Li, Jinfeng
    Wang, Liping
    Guan, Liwen
    Zhang, Huifeng
    [J]. MECHATRONICS AND INTELLIGENT MATERIALS II, PTS 1-6, 2012, 490-495 : 1342 - 1347
  • [2] An Experiment Study on the Dynamic Characteristics of Linear Rolling Guide
    Zhao Libo
    Weng Zeyu
    Ding Hongang
    Shen Xiaoqing
    Tang Xuezhe
    [J]. FUNCTIONAL MANUFACTURING AND MECHANICAL DYNAMICS II, 2012, 141 : 71 - +
  • [3] Parameters Identification and Dynamic Analysis of Linear Rolling Guide
    Li, Lei
    Zhang, Jian Run
    [J]. ADVANCES IN MECHANICAL DESIGN, PTS 1 AND 2, 2011, 199-200 : 7 - +
  • [4] Analysis on Dynamic Characteristics of CNC Machine Tool and Experiment with Influence of Rolling Guide Joint Considered
    Li, Xiaopeng
    Nie, Huifan
    [J]. MANUFACTURING SCIENCE AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 443-444 : 745 - +
  • [5] Finite element model for static characteristic analysis of rolling linear guide
    Wei, Jiayong
    Li, Cancan
    Ma, Yali
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2022, 236 (03) : 1721 - 1732
  • [6] Analysis on Dynamic Characteristics of the Linear Rolling Guide Pair and Experiment
    Li, Xiaopeng
    Nie, Wei
    Wen, Bangchun
    [J]. ADVANCES IN MECHANICAL ENGINEERING, PTS 1-3, 2011, 52-54 : 989 - 994
  • [7] The Design of Dynamic Friction Measuring System of Linear Rolling Guide
    Li, Chunmei
    Feng, Hutian
    Yu, Yanmei
    [J]. PROCEEDINGS OF THE THIRD INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND MECHANICS, VOLS 1 AND 2, 2009, : 432 - 438
  • [8] Static characteristic analysis of linear rolling guide with offset distance gothic groove
    Wang Jianhua
    Ma Tongmin
    Zhao Yongsheng
    Liu Zhifeng
    [J]. PROCEEDINGS OF THE FIFTH INTERNATIONAL SYMPOSIUM ON TEST AUTOMATION & INSTRUMENTATION, VOLS 1 AND 2, 2014, : 575 - 581
  • [9] Design guide of bolt locations for bolted-joint plates considering dynamic characteristics
    Yoo, J.
    Hong, S-J
    Choi, J. S.
    Kang, Y. J.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2009, 223 (02) : 363 - 375
  • [10] Influence of Joint Connection Modelling on Dynamic Characteristic of the Buildings
    Akyildiz, Ahmet Tugrul
    Kowalska-Koczwara, Alicja
    Kwiecien, Arkadiusz
    [J]. 3RD WORLD MULTIDISCIPLINARY CIVIL ENGINEERING, ARCHITECTURE, URBAN PLANNING SYMPOSIUM (WMCAUS 2018), 2019, 471
12345