Investigation on Cooling System of High-Concentration Photovoltaic with Oscillating Heat Pipe

被引:1
|
作者
Geng Wen-guang [1 ]
Gao Ling [1 ]
Shao Min [1 ]
Yuan Dong-ling [1 ]
Li Xuan-you [1 ]
机构
[1] Shandong Acad Sci, Ind Energy Conservat Res Ctr, Jinan, Peoples R China
来源
关键词
concentration photovoltaic; oscillating heat pipe; compunational fluid dynamics; experimental study; cooling; MODEL; CELLS;
D O I
10.4028/www.scientific.net/AMR.512-515.84
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Cooling of concentration photovoltaic (CPV) cells with oscillating heat pipe was investigated numerically and experimentally. Based on Reynolds-averaged Navier-Stokes approach, a turbulent model was proposed in present work. Numerical study presented the temperature distribution under different heat flux and various outdoor conditions. CPV (with 12 suns concentration) system was experimentally studied, and the results show that the oscillating heat pipe begin operation at about 62 degrees C, and CPV system could enhance electric power with a good cooling system under a high concentration light. The oscillating heat pipe cooling system, without air fan or pump, no power consumption, gives a uniform, reliable, simple and costless cooling method, oscillating heat pipe cooling is suitable for the high-CPV system.
引用
收藏
页码:84 / 89
页数:6
相关论文
共 50 条
  • [1] Numerical and experimental study on cooling high-concentration photovoltaic cells with oscillating heat pipe
    Geng, Wen-guang
    Gao, Ling
    Shao, Min
    Li, Xuan-you
    [J]. INTERNATIONAL JOURNAL OF LOW-CARBON TECHNOLOGIES, 2012, 7 (03) : 168 - 173
  • [2] Numerical investigation of high-concentration photovoltaic module heat dissipation
    Wang, Y. N.
    Lin, T. T.
    Leong, J. C.
    Hsu, Y. T.
    Yeh, C. P.
    Lee, P. H.
    Tsai, C. H.
    [J]. RENEWABLE ENERGY, 2013, 50 : 20 - 26
  • [3] Experimental Investigation of the Effect of Heat Pipe Tilting on a Concentrated Photovoltaic/Heat Pipe Passive Cooling System
    Lashin, Abdelrahman
    Sabry, Mohamed
    [J]. JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME, 2024, 146 (04):
  • [4] An extensive review on the latest developments of using oscillating heat pipe on cooling of photovoltaic thermal system
    Kargaran, Mahyar
    Goshayeshi, Hamid Reza
    Pourpasha, Hadi
    Chaer, Issa
    Heris, Saeed Zeinali
    [J]. THERMAL SCIENCE AND ENGINEERING PROGRESS, 2022, 36
  • [5] Design of a High-Concentration Microtracking Photovoltaic System
    Brulo, Gregory S.
    Grede, Alex J.
    Ren, Andrew J.
    Rahn, Christopher D.
    Giebink, Noel C.
    [J]. JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 2019, 11 (06):
  • [6] Analytical, experimental, and numerical analysis of a microchannel cooling system for high-concentration photovoltaic cells
    J. A. A. Ortegon
    R. R. Souza
    J. B. C. Silva
    E. M. Cardoso
    [J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 41
  • [7] Analytical, experimental, and numerical analysis of a microchannel cooling system for high-concentration photovoltaic cells
    Ortegon, J. A. A.
    Souza, R. R.
    Silva, J. B. C.
    Cardoso, E. M.
    [J]. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2019, 41 (06)
  • [8] Novel trimmed heat extraction system for high-concentration photovoltaic in hot climate zones
    Al-Amri, Fahad Ghallab
    Maatallah, Taher
    Zachariah, Richu
    Okasha, Ahmed T.
    Alghamdi, Abdullah Khalid
    [J]. INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2022, 46 (09) : 12057 - 12072
  • [9] A high-efficiency hybrid high-concentration photovoltaic system
    Zimmermann, Severin
    Helmers, Henning
    Tiwari, Manish K.
    Paredes, Stephan
    Michel, Bruno
    Wiesenfarth, Maike
    Bett, Andreas W.
    Poulikakos, Dimos
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 89 : 514 - 521
  • [10] Investigation of a heat pipe cooling system in high-efficiency grinding
    He, Qingshan
    Fu, Yucan
    Xu, Hongjun
    Ma, Ke
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 70 (5-8): : 833 - 842