KrF excimer laser induced ablation-planarization of GaN surface

被引：33
|
作者：
Akane, T
Sugioka, K
Ogino, H
Takai, H
Midorikawa, K
机构：
[1] RIKEN, Inst Phys & Chem Res, Wako, Saitama 3510198, Japan
[2] Tokyo Denki Univ, Fac Engn, Dept Elect Engn, Tokyo 1018457, Japan
来源：
APPLIED SURFACE SCIENCE | 1999年 / 148卷 / 1-2期
关键词：
GaN; ablation; planerization; KrF excimer laser; X-ray photoelectron spectroscopy (XPS); atomic force microscopy (AFM);
D O I：
10.1016/S0169-4332(99)00156-7
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The surface roughness of an as-grown GaN epilayer is reduced using a combination of KrF excimer laser irradiation and post chemical wet treatment. KrF excimer laser irradiation ablates GaN surfaces. resulting in the formation of a Ga-rich layer on the surface. The Ga-rich layer is etched off by hydrochloric acid treatment. X-ray photoelectron spectroscopic (XPS) analysis reveals that the chemically etched surface has similar composition and chemical bonding to those of untreated GaN. The average roughness (R-a) is improved by similar to 43% compared with an untreated GaN sample with a laser fluence of over 2.0 J/cm(2). (C) 1999 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：133 / 136
页数：4
相关论文
共 50 条
  • [1] Surface ablation of PLLA induced by KrF excimer laser
    Slepicka, P.
    Michaljanicova, I.
    Sajdl, P.
    Fitl, P.
    Svorcik, V.
    APPLIED SURFACE SCIENCE, 2013, 283 : 438 - 444
  • [2] Planarization of hexagonal-GaN(0001) by KrF excimer-laser ablation followed by hydrochloric acid treatment
    Akane, T
    Sugioka, K
    Ogino, H
    Takai, H
    Midorikawa, K
    LASER APPLICATIONS IN MICROELECTRONIC AND OPTOELECTRONIC MANUFACTURING IV, 1999, 3618 : 221 - 227
  • [3] Investigation of KrF excimer laser ablation and induced surface damage on lithium niobate
    Chong, HW
    Mitchell, A
    Hayes, JP
    Austin, MW
    APPLIED SURFACE SCIENCE, 2002, 201 (1-4) : 196 - 203
  • [4] Surface texture development in KrF excimer laser ablation of dentin
    Sivakumar, M.
    Oliveira, V.
    Vilar, R.
    ADVANCED MATERIALS FORUM III, PTS 1 AND 2, 2006, 514-516 : 1068 - 1072
  • [5] GaN ablation etching by simultaneous irradiation with F2 laser and KrF excimer laser
    Akane, T
    Sugioka, K
    Hammura, K
    Aoyagi, Y
    Midorikawa, K
    Obata, K
    Toyoda, K
    Nomura, S
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2001, 19 (04): : 1388 - 1391
  • [6] Elimination of surface debris generated by KrF excimer laser ablation of polyimide
    Shin, DS
    Lee, JH
    Suh, J
    Kim, TH
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 416 (1-2): : 205 - 210
  • [7] KrF Excimer Laser Ablation of Human Enamel
    Sivakumar, M.
    Oliveira, V.
    Vilar, R.
    Botelho do Rego, A. M.
    ADVANCED MATERIALS FORUM IV, 2008, 587-588 : 42 - +
  • [8] Study on the ablation of a copper target by an KrF excimer laser
    Garrelie, F
    Girault, C
    Champeaux, C
    Catherinot, A
    ANNALES DE PHYSIQUE, 1997, 22 : 125 - 126
  • [9] High etching rate of GaN films by KrF excimer laser
    Chu, CF
    Lee, CK
    Yu, CC
    Wang, YK
    Tasi, JY
    Yang, CR
    Wang, SC
    MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 2001, 82 (1-3): : 42 - 44
  • [10] Surface modification of elastomer/carbon composite by Nd+:YAG laser and KrF excimer laser ablation
    Silvain, JF
    Niino, H
    Ono, S
    Nakaoka, S
    Yabe, A
    APPLIED SURFACE SCIENCE, 1999, 141 (1-2) : 25 - 34
12345