Finite Element Simulation for High Speed Machining Cycloidal Gear

被引：0
|
作者：
Lu, Lihui [1 ]
Qi, Houjun [1 ]
Liu, Xinling [1 ]
机构：
[1] Tianjin Univ Technol & Educ, Key Lab Tianjin High Speed Cutting & Precis Machi, Tianjin 300222, Peoples R China
来源：
PROCEEDINGS OF FIRST INTERNATIONAL CONFERENCE OF MODELLING AND SIMULATION, VOL V: MODELLING AND SIMULATION IN MECHANICS AND MANUFACTURE | 2008年
关键词：
cycloidal gear; bearing steel; cutting force; finite element method;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Aiming at the cycloid gear whose material is hardened bearing steel, which has characteristics of thin-wall, high surface hardness and complex profile, we establish the finite element mode for its milling, and study the finite element simulation of the milling force in high speed machining by using the finite element software. The profile curve of cycloidal gear is divided into three parts, and the finite element model has build separately. Predictions of cutting force and its tendency presents that the results of the FE simulation accords with the experiment. This paper provides a feasible approach to estimate the cutting force of cycloidal gear with bearing steel.
引用
收藏
页码：92 / 97
页数：6
相关论文
共 50 条
  • [1] A finite element model for high speed machining
    ElChazly, H
    Riad, MSM
    Adly, MA
    ElHossainy, TM
    [J]. CURRENT ADVANCES IN MECHANICAL DESIGN AND PRODUCTION VI, 1996, : 199 - 210
  • [2] Finite element analysis of high speed and heavy load gear
    Wang, Lihua
    Li, Runfang
    Lin, Tengjiao
    Li, Shaobin
    [J]. 1773, China Mechanical Engineering Magazine Office (14):
  • [3] Research on simulation of cycloidal spinning tool inverted cone machining based on finite element software vericut
    Wang, L. H.
    [J]. BASIC & CLINICAL PHARMACOLOGY & TOXICOLOGY, 2019, 125 : 41 - 41
  • [4] Finite element analysis of cutting forces in high speed machining
    Zhao, Jun
    Ai, Xing
    Li, Zuoli
    [J]. ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY II, 2006, 532-533 : 753 - +
  • [5] Finite element analysis of internal gear in high-speed planetary gear units
    Ge N.
    Zhang J.
    [J]. Trans. Tianjin Univ, 2008, 1 (11-15): : 11 - 15
  • [6] Finite Element Analysis of Internal Gear in High-Speed Planetary Gear Units
    葛楠
    张俊
    [J]. Transactions of Tianjin University, 2008, (01) : 11 - 15
  • [7] High-speed cryogenic machining of the carbon nanotube reinforced nanocomposites: Finite element analysis and simulation
    Pashaki, Pooyan Vahidi
    Pouya, Milad
    Maleki, Vahid A.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2018, 232 (11) : 1927 - 1936
  • [8] Finite element simulation of high-speed cutting
    Yang, Yong
    Ke, Ying-Lin
    Dong, Hui-Yue
    [J]. Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2006, 27 (03): : 531 - 535
  • [9] 3D Finite Element Modeling of High Speed Machining
    Markopoulos, A. P.
    Kantzavelos, K.
    Galanis, N. I.
    Manolakos, D. E.
    [J]. INTERNATIONAL JOURNAL OF MANUFACTURING MATERIALS AND MECHANICAL ENGINEERING, 2011, 1 (04) : 1 - 18
  • [10] Finite-element techniques applied to high-speed machining
    Vaz, M
    Owen, DRJ
    Peric, D
    [J]. SIMULATION OF MATERIALS PROCESSING: THEORY, METHODS AND APPLICATIONS, 1998, : 973 - 978
12345