An experimental investigation of thermal contact conductance of Hastelloy C-276 based on steady-state heat flux method

被引：19
|
作者：
Zhu, Zhi [1 ]
Zhang, Li-Wen [1 ]
Wu, Qin-Ke [1 ]
Gu, Sen-Dong [1 ]
机构：
[1] Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116085, Peoples R China
来源：
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER | 2013年 / 41卷
关键词：
Thermal contact conductance; Experimental investigation; Hastelloy C-276; SS302; Rotor can; Shrink fit;
D O I：
10.1016/j.icheatmasstransfer.2012.11.007
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
In this study, measurements of the thermal contact conductance (TCC) at the interfaces of Hastelloy C-276/Hastelloy C-276 and Hastelloy C-276/SS302 test pairs were conducted by a self-developed experimental setup based on the steady-state heat flux method. The reliability of experimental setup and method was validated by the repeated measurement of the thermal contact conductance between Hastelloy C-276 and Hastelloy C-276. In addition, the effects of contact pressure and interfacial temperature on thermal contact conductance were also discussed. This study not only provides a necessary database for the accurate numerical simulation but also lays a foundation for the optimal design of the shrink fitting process of rotor can. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：63 / 67
页数：5
相关论文
共 50 条
  • [1] Experimental Investigation of Contact Heat Transfer at High Temperature Based on Steady-State Heat Flux Method
    Xing, L.
    Zhang, L. W.
    Zhang, X. Z.
    Yue, C. X.
    EXPERIMENTAL HEAT TRANSFER, 2010, 23 (02) : 107 - 116
  • [2] Experimental investigation of Hastelloy C-276 using abrasive waterjet milling
    Gopichand, G.
    Sreenivasarao, M.
    MATERIALS RESEARCH EXPRESS, 2019, 6 (12)
  • [3] Experimental investigation of finishing forces on Hastelloy C-276 using UAMAF process
    Anjaneyulu, Kamepalli
    Venkatesh, Gudipadu
    INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2023, 17 (02): : 703 - 715
  • [4] Experimental investigation of finishing forces on Hastelloy C-276 using UAMAF process
    Kamepalli Anjaneyulu
    Gudipadu Venkatesh
    International Journal on Interactive Design and Manufacturing (IJIDeM), 2023, 17 : 703 - 715
  • [5] Experimental investigation of transient heat transfer between Hastelloy C-276/narrow air gap/silicon steel
    Zhu, Zhi
    Zhang, Li Wen
    Gu, Sen Dong
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2013, 45 : 221 - 226
  • [6] Numerical and Experimental Investigation of Pulsed Laser Welding of Hastelloy C-276 Alloy Sheets
    Guo, Yuquan
    Guo, Dongming
    Ma, Guangyi
    Wu, Dongjiang
    MATERIALS PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2011, 154-155 : 1468 - 1471
  • [7] Experimental Investigation and Performance Optimization during Machining of Hastelloy C-276 Using Green Lubricants
    Singh, Gurpreet
    Aggarwal, Vivek
    Singh, Sehijpal
    Singh, Balkar
    Sharma, Shubham
    Singh, Jujhar
    Li, Changhe
    Ilyas, R. A.
    Mohamed, Abdullah
    MATERIALS, 2022, 15 (15)
  • [8] Staggered spinning of thin-walled Hastelloy C-276 cylindrical parts: Numerical simulation and experimental investigation
    Lin, Y. C.
    Qian, Shu-Sheng
    Chen, Xiao-Min
    Li, Xin-He
    Yang, Hui
    THIN-WALLED STRUCTURES, 2019, 140 : 466 - 476
  • [9] Numerical Simulation and Experimental Investigation of Residual Stresses and Distortions in Pulsed Laser Welding of Hastelloy C-276 Thin Sheets
    Guo Yuquan
    Wu Dongjiang
    Ma Guangyi
    Guo Dongming
    RARE METAL MATERIALS AND ENGINEERING, 2014, 43 (11) : 2663 - 2668
  • [10] Steady state experimental investigation of thermal contact conductance between curvilinear contacts using liquid crystal thermography
    Kumar, Surya
    Tariq, Andallib
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2017, 118 : 53 - 68
12345