Research on Efficiency and Stability of Computer Numerical Control Lathe

被引：0
|
作者：
Long, Hua [1 ]
Luo, Yongxin [1 ]
Shen, Xiaolong [1 ]
Zhao, Beichen [2 ]
机构：
[1] Hunan Ind Polytech, Changsha 410208, Hunan, Peoples R China
[2] Huaihua Vocat & Tech Coll, Huaihua 418000, Hunan, Peoples R China
来源：
PRODUCT DESIGN AND MANUFACTURE | 2012年 / 120卷
关键词：
CNC lathe efficiency; stable cutting; machine tool parameters;
D O I：
10.4028/www.scientific.net/AMM.120.108
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In order to study the highly efficient and stable cutting of computer numerical control lathe (CNC lathe), this paper established a dynamics model of chatter turning system on tool side, and analyzed the influences of the chatter stable lobes about the CNC lathe system's overlap coefficient, cutting rigidity coefficient in unit width, main vibration system's damping ratio, and observed the chatter effects about the chatter stable lobes in different regions by experimental methods. Research shows that the choice of the cutting speed in the stable regions can significantly increase the cutting width, and improve the efficiency of cutting.
引用
收藏
页码：108 / +
页数：2
相关论文
共 50 条
  • [1] Research and Development on Miniature Teaching Computer Numerical Control Lathe Machine
    Zhang, Hai Yun
    Zhao, Yu Gang
    Zhao, Guo Yong
    Li, Yan Rong
    Si-Ma, Zhong Wen
    MECHATRONICS AND MATERIALS PROCESSING I, PTS 1-3, 2011, 328-330 : 810 - 813
  • [2] Design and implementation of a Prototype Lathe Milling of Computer Numerical Control
    Acuna, Fausto
    Gordon, Andres
    Nunez, Walter
    2013 II INTERNATIONAL CONGRESS OF ENGINEERING MECHATRONICS AND AUTOMATION (CIIMA), 2013,
  • [3] NUMERICAL CONTROL OF A LATHE
    KOREN, Y
    SHANI, A
    BENURI, J
    IEEE TRANSACTIONS ON INDUSTRY AND GENERAL APPLICATIONS, 1970, IGA6 (02): : 175 - &
  • [4] On the Criticality Analysis of Computer Numerical Control Lathe Subsystems for Predictive Maintenance
    Nikhil M. Thoppil
    V. Vasu
    C. S. P. Rao
    Arabian Journal for Science and Engineering, 2020, 45 : 5259 - 5271
  • [5] On the Criticality Analysis of Computer Numerical Control Lathe Subsystems for Predictive Maintenance
    Thoppil, Nikhil M.
    Vasu, V.
    Rao, C. S. P.
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2020, 45 (07) : 5259 - 5271
  • [6] Development of a CAD/CAM system on an Emco-5 computer numerical control lathe
    1600, Publ by Elsevier Science Publishers B.V., Amsterdam, Neth
  • [7] Reliability optimization design for stochastic static deformation of computer numerical control lathe spindle
    Li, Changyou
    Guo, Song
    Zhang, Yimin
    Shi, Yanlin
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2016, 230 (01) : 83 - 90
  • [8] A computer numerical control (CNC) multi-pass spinning solution to a center lathe retrofit
    Mohamed Abd-Alrazzaq
    Mahmoud Hamed Ahmed
    Mohammad Abdelwahed Younes
    SN Applied Sciences, 2019, 1
  • [9] A computer numerical control (CNC) multi-pass spinning solution to a center lathe retrofit
    Abd-Alrazzaq, Mohamed
    Ahmed, Mahmoud Hamed
    Younes, Mohammad Abdelwahed
    SN APPLIED SCIENCES, 2019, 1 (01):
  • [10] A Research about any Regional Input N Error Method of Numerical Control Lathe
    Fan, Jin-wei
    Yan, Hong-xia
    Yi, Xiao-long
    Liu, Chao
    2ND INTERNATIONAL CONFERENCE ON SIMULATION AND MODELING METHODOLOGIES, TECHNOLOGIES AND APPLICATIONS (SMTA 2015), 2015, : 245 - 249
12345