Powder injection molding of Ti-6Al-4V alloy

被引：61
|
作者：
Guo, SB [1 ]
Qu, XH
He, XB
Zhou, T
Duan, BH
机构：
[1] Jiangxi Sci & Technol Normal Univ, Jiangxi Key Lab Surface Engn, Nanchang 330013, Peoples R China
[2] Univ Sci & Technol Beijing, Sch Mat Sci & Engn, Beijing 100083, Peoples R China
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2006年 / 173卷 / 03期
关键词：
PIM; Ti-6Al-4V; carbon and oxygen control; mechanical properties;
D O I：
10.1016/j.jmatprotec.2005.12.001
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An improved wax-based binder was developed for the powder injection molding of Ti-6Al-4V. A critical powder loading of 72 vol% and a pseudo-plastic flow behavior were obtained by the feedstock based on the binder. The injection molding, debinding and sintering processes were studied. An ideal control of carbon and oxygen contents was achieved by thermal debinding in vacuum atmosphere (10(-3) Pa). The mechanical properties of as-sintered specimens were almost equivalent to those of the same alloy made by conventional press-sintefing process. Good shape retention and +/- 0.02 mm dimension deviation were achieved. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码：310 / 314
页数：5
相关论文
共 50 条
  • [1] Ti-6Al-4V Alloy Bimodal Powders for Powder Injection Molding
    Glazkova, Elena
    Rodkevich, Nikolay
    Toropkov, Nikita
    Pervikov, Aleksandr
    Lerner, Marat
    [J]. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS. MATERIALS WITH MULTILEVEL HIERARCHICAL STRUCTURE AND INTELLIGENT MANUFACTURING TECHNOLOGY, 2020, 2310
  • [2] Preparation of Ti-6Al-4V feedstock for titanium powder injection molding
    Dongguo Lin
    Sung Taek Chung
    Young Sam Kwon
    Seong Jin Park
    [J]. Journal of Mechanical Science and Technology, 2016, 30 : 1859 - 1864
  • [3] Preparation of Ti-6Al-4V feedstock for titanium powder injection molding
    Lin, Dongguo
    Chung, Sung Taek
    Kwon, Young Sam
    Park, Seong Jin
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2016, 30 (04) : 1859 - 1864
  • [4] Ti-6Al-4V alloy cortical bone screw production by powder injection molding method
    Urtekin, Levent
    Taskin, Anil
    [J]. MATERIALS EXPRESS, 2017, 7 (04) : 245 - 252
  • [5] Effect of annealing processing on microstructure and properties of Ti-6Al-4V alloy by powder injection molding
    郭世柏
    曲选辉
    向军淮
    张荣发
    何向明
    李明升
    多书旺
    李文魁
    [J]. Transactions of Nonferrous Metals Society of China, 2006, (S2) : 701 - 704
  • [6] Effect of annealing processing on microstructure and properties of Ti-6Al-4V alloy by powder injection molding
    Guo, SB
    Qu, XH
    Xiang, JH
    Zhang, RF
    He, XM
    Li, MS
    Duo, SW
    Li, WK
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2006, 16 : S701 - S704
  • [7] The investigation of production parameters of Ti-6Al-4V component by powder injection molding
    Subasi, Mehmet
    Safarian, Asghar
    Karatas, Cetin
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 105 (11): : 4747 - 4760
  • [8] The investigation of production parameters of Ti-6Al-4V component by powder injection molding
    Mehmet Subaşi
    Asghar Safarian
    Çetin Karataş
    [J]. The International Journal of Advanced Manufacturing Technology, 2019, 105 : 4747 - 4760
  • [9] The Viscosity Model of Ti-6Al-4V Feedstocks in Metal Powder Injection Molding
    Fu Junyu
    [J]. APPLIED MECHANICS AND MATERIALS I, PTS 1-3, 2013, 275-277 : 2161 - 2165
  • [10] Powder injection molding of Ti6AI4V alloy
    Qu, Xuanhui
    Guo, Shibo
    Tang, Chunfeng
    Qin, Mingli
    He, Xinbo
    Islam, Syed Humail
    [J]. THERMEC 2006, PTS 1-5, 2007, 539-543 : 2639 - +
12345