Antifreezing Heat-Resistant Hollow Hydrogel Tubes

Hollow hydrogel tubes that are capable of maintaining their flexibility and structural stability in extreme temperature conditions have potential for use in biomedical scaffolds, carriers, and soft robotics over a wide temperature range. However, the preparation of hollow hydrogel tubes still remains challenging because it normally requires templates or complex devices and it is hard to endow the hollow tubes with antifreezing heat-resistant capabilities. We report a protocol that does not require a template or complex devices, in which sodium alginate film strips are immersed in an aqueous mixture of CaCO3, CaCl2, NaHCO3, and HCl, which results in the manufacture of hollow tubes in 30 min. These hollow tubes are functionalized by glycerol and poly(ethylene glycol), which provides the tubes with antifreezing heat-resistant performances and enables them to keep their flexibility and hollow structures from -70 to 120 degrees C. This is the first report on antifreezing heat-resistant hollow hydrogel tubes, to the best of our knowledge. Such hollow tubes as carriers can control the sublimation of a mothball at a rate of 1.1 mg/h, which is one-tenth of the sublimating rate of an unloaded mothball. This sublimating rate reduces the hazard to environments along with maintaining the repellent effects. As the tube is a honey carrier, it enables the sustainable release of the honey over 800 min with a high efficacy for tricking and capturing ants. The simple applications demonstrate that the antifreezing heat-resistant hollow tubes might be feasible as carriers for the controlled release in extremely cold/hot environments.