New results in 3D meso-mechanical analysis of concrete specimens using interface elements

被引：0
|
作者：
Caballero, A. [1 ]
Carol, I. [1 ]
López, C. M. [1 ]
机构：
[1] UPC, ETSECCPB, Barcelona, Spain
来源：
Computational Modelling of Concrete Structures | 2006年
关键词：
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A meso-mechanical model for the numerical analysis of concrete specimens in 3D has been recently proposed. In this approach, concrete is represented as a composite material with the larger aggregates embedded in a mortar-plus-aggregates matrix. Both continuum-type components are considered linear elastic, while the possibilities of failure are provided with the systematic use of zero-thickness interface elements equipped with a cohesive fracture constitutive law. These elements are inserted along all potential crack planes in the mesh "a priori" of the analysis. In this paper, the basic features of the model are summarized, and then results of calculations are presented, which include uniaxial tension and compression loading of 64 and 137-aggregate cubical specimens. The results confirm the consistency of the approach with physical phenomena and well-known features of concrete behavior, and show low scatter between specimens of different size and number of aggregates but similar volume ratio.
引用
收藏
页码：43 / 52
页数：10
相关论文
共 50 条
  • [1] Advances in meso-mechanical analysis of concrete specimens using zero-thickness interface elements
    Carol, I.
    Idiart, A.
    Lopez, C. M.
    Caballero, A.
    FRACTURE MECHANICS OF CONCRETE AND CONCRETE STRUCTURES, VOLS 1-3: VOL 1: NEW TRENDS IN FRACTURE MECHANICS OF CONCRETE; VOL 2: DESIGN, ASSESSMENT AND RETROFITTING OF RC STRUCTURES; VOL 3: HIGH-PERFORMANCE CONCRETE, BRICK-MASONRY AND ENVIRONMENTAL ASPECTS, 2007, 1-3 : 163 - +
  • [2] 3D meso-mechanical analysis of concrete specimens under biaxial loading
    Caballero, A.
    Carol, I.
    Lopez, C. M.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2007, 30 (09) : 877 - 886
  • [3] 3D Meso-Mechanical Analysis Of Elastic Properties Of Concrete Materials
    Zhang, Zhi
    Xu, Peibao
    PROCEEDINGS OF THE 2016 6TH INTERNATIONAL CONFERENCE ON MACHINERY, MATERIALS, ENVIRONMENT, BIOTECHNOLOGY AND COMPUTER (MMEBC), 2016, 88 : 1701 - 1706
  • [4] New results in meso-mechanical modeling of concrete using fracture-based zero-thickness interface elements
    Ciancio, D
    Lopez, CM
    Carol, I
    Cuomo, M
    COMPUTATIONAL MODELLING OF CONCRETE STRUCTURES, 2003, : 171 - 177
  • [5] 3D meso-mechanical modeling of concrete spall tests
    Xu, P. B.
    Xu, H.
    Wen, H. M.
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2016, 97 : 46 - 56
  • [6] The penetration and perforation of concrete targets: A 3D meso-mechanical modelling
    Xu, L. Y.
    Yang, L. F.
    Wen, H. M.
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2022, 159
  • [7] HIGH TEMPERATURE EFFECTS IN MORTAR AND CONCRETE SPECIMENS USING A MESO-MECHANICAL MODEL WITH FRACTURE BASED ZERO-THICKNESS INTERFACE ELEMENTS
    Rodriguez, M.
    Lopez, C. M.
    Carol, I.
    Murcia, J.
    COMPUTATIONAL PLASTICITY XI: FUNDAMENTALS AND APPLICATIONS, 2011, : 1607 - 1617
  • [8] Determination of mechanical parameters for elements in meso-mechanical models of concrete
    Xianglin GU
    Junyu JIA
    Zhuolin WANG
    Li HONG
    Feng LIN
    Frontiers of Structural and Civil Engineering, 2013, 7 (04) : 391 - 401
  • [9] Determination of mechanical parameters for elements in meso-mechanical models of concrete
    Gu X.
    Jia J.
    Wang Z.
    Hong L.
    Lin F.
    Frontiers of Structural and Civil Engineering, 2013, 7 (4) : 391 - 401
  • [10] 'Onion-peel' cracking and spalling in coupled meso-mechanical analysis of External Sulfate Attack in concrete using zero-thickness interface elements
    Biscaro, Caterina
    Martinez, Ariadna
    Perez, Adria
    Xotta, Giovanna
    Lopez, Carlos Maria
    Carol, Ignacio
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 455
12345