Analysis of fluid flow and heat transfer in a double pipe heat exchanger with porous structures

被引:77
|
作者
Targui, N. [1 ]
Kahalerras, H. [1 ]
机构
[1] Houari Boumediene Univ Sci & Technol, Fac Mech & Proc Engn, Algiers 16111, Algeria
关键词
Double pipe heat exchanger; Porous structures; Heat transfer enhancement;
D O I
10.1016/j.enconman.2008.02.010
中图分类号
O414.1 [热力学];
学科分类号
摘要
A numerical study of flow and heat transfer characteristics is made in a double pipe heat exchanger with porous structures inserted in the annular gap in two configurations: on the inner cylinder (A) and on both the cylinders in a staggered fashion (B). The flow field in the porous regions is modelled by the Darcy-Brinkman-Forchheimer model and the finite volume method is used to solve the governing equations. The effects of several parameters such as Darcy number, porous structures thickness and spacing and thermal conductivity ratio are considered in order to look for the most appropriate properties of the porous structures that allow optimal heat transfer enhancement. It is found that the highest heat transfer rates are obtained when the porous structures are attached in configuration B especially at small spacing and high thicknesses. (C) 2008 Elsevier Ltd. All rights reserved.
引用
下载
收藏
页码:3217 / 3229
页数:13
相关论文
共 50 条
  • [1] Enhancement of heat transfer and heat exchanger effectiveness in a double pipe heat exchanger filled with porous media: Numerical simulation and sensitivity analysis of turbulent fluid flow
    Shirvan, Kamel Milani
    Ellahi, Rahmat
    Mirzakhanlari, Soroush
    Mamourian, Mojtaba
    APPLIED THERMAL ENGINEERING, 2016, 109 : 761 - 774
  • [2] Numerical analysis of heat transfer enhancement in a double pipe heat exchanger with porous fins
    Kahalerras, H.
    Targui, N.
    INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 2008, 18 (5-6) : 593 - 617
  • [3] Heat transfer and sensitivity analysis in a double pipe heat exchanger filled with porous medium
    Shirvan, Kamel Milani
    Mirzakhanlari, Soroush
    Kalogirou, Soteris A.
    Oztop, Hakan F.
    Mamourian, Mojtaba
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2017, 121 : 124 - 137
  • [4] Analysis on flow and heat transfer of fluid in porous metal foam heat exchanger
    Li, Ju-Xiang
    Tu, Shan-Dong
    Shiyou Huagong Gaodeng Xuexiao Xuebao/Journal of Petrochemical Universities, 2008, 21 (02): : 80 - 83
  • [5] Fluid flow and heat transfer in an air-to-water double-pipe heat exchanger
    Sheikholeslami, M.
    Gorji-Bandpy, M.
    Ganji, D. D.
    EUROPEAN PHYSICAL JOURNAL PLUS, 2015, 130 (11): : 1 - 12
  • [6] Fluid flow and heat transfer in an air-to-water double-pipe heat exchanger
    M. Sheikholeslami
    M. Gorji-Bandpy
    D. D. Ganji
    The European Physical Journal Plus, 130
  • [7] Heat transfer analysis of the DOT 4 brake fluid using a double pipe heat exchanger
    Sharma, C.
    Siddiqui, M.
    Imran, Md
    Manikandaraja, G.
    3RD INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2020), PTS 1-6, 2020, 912
  • [8] Flow and Heat transfer Experimental Investigation of Nanofluid in a Double pipe Heat Exchanger
    Ghalib, Lubna
    Rahma, N. M.
    Eweedand, K. M.
    Al-Kamal, A. K.
    INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING AND SCIENCE, 2018, 454
  • [9] Investigation of turbulent heat transfer and nanofluid flow in a double pipe heat exchanger
    Bahmani, Mohammad Hussein
    Sheikhzadeh, Ghanbarali
    Zarringhalam, Majid
    Akbari, Omid Ali
    Alrashed, Abdullah A. A. A.
    Shabani, Gholamreza Ahmadi Sheikh
    Goodarzi, Marjan
    ADVANCED POWDER TECHNOLOGY, 2018, 29 (02) : 273 - 282
  • [10] Enhancement of Heat Transfer in Double Pipe Heat Exchanger
    Ponshanmugakumar, A.
    Rajavel, R.
    MATERIALS TODAY-PROCEEDINGS, 2019, 16 : 706 - 713