Tribological properties of hydrogenated amorphous carbon under dry and lubricated conditions

被引：13

作者：

Vengudusamy, Balasubramaniam ^{[1
]}

Grafl, Alexander ^{[1
]}

Preinfalk, Klaus ^{[2
]}

机构：

[1] AC2T Res GmbH, A-2700 Wiener Neustadt, Austria

[2] High Tech Coatings GmbH, Miba Coating Grp, A-4655 Vorchdorf, Austria

来源：

关键词：

DLC coatings; a-C:H; Gear oil; Graphitisation; Friction; Wear; DIAMOND-LIKE-CARBON; DLC COATINGS; DLC/DLC CONTACTS; ADDITIVES; FRICTION; BEHAVIOR; OIL; SURFACES; SYSTEMS; STEEL;

D O I：

10.1016/j.diamond.2013.11.009

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Diamond-like carbon (DLC) coatings are considered as potential surface coatings for many engineering applications including gears and engine parts. It is important to know whether conventional extreme pressure (EP) additive-containing oil can work with DLCs and provide tribological performance as effective as they provide on steel surfaces. This study examines the friction and wear properties of hydrogenated amorphous carbon (a-C:H) under dry, base oil (BO)- and fully formulated gear oil (FF)-lubricated conditions. Pronounced graphitisation occurs due to rubbing under dry condition and provides low friction but promotes wear. However, BO and FF greatly suppress graphitisation and wear. Tribofilms formed from FF in a-C: H/steel contact appear to exhibit superior antiwear properties than those formed in steel/steel contact. (C) 2014 Elsevier B.V. All rights reserved.

引用

页码：53 / 64

页数：12

共 50 条

[1] Influence of Silicon on the Wear Properties of Amorphous Carbon Under Dry and Lubricated Conditions
Vengudusamy, Balasubramaniam
Grafl, Alexander
Preinfalk, Klaus
TRIBOLOGY LETTERS, 2014, 53 (03) : 569 - 583
[2] Influence of Silicon on the Wear Properties of Amorphous Carbon Under Dry and Lubricated Conditions
Balasubramaniam Vengudusamy
Alexander Grafl
Klaus Preinfalk
Tribology Letters, 2014, 53 : 569 - 583
[3] The effect of temperature on the tribological mechanisms and reactivity of hydrogenated, amorphous diamond-like carbon coatings under oil-lubricated conditions
Kalin, M.
Roman, E.
Vizintin, J.
THIN SOLID FILMS, 2007, 515 (7-8) : 3644 - 3652
[4] Effect of Surface Roughening of Substrate Steel on the Improvement of Delamination Strength and Tribological Behavior of Hydrogenated Amorphous Carbon Coating Under Lubricated Conditions
Masabumi Masuko
Takuya Kudo
Akihito Suzuki
Tribology Letters, 2013, 51 : 181 - 190
[5] Effect of Surface Roughening of Substrate Steel on the Improvement of Delamination Strength and Tribological Behavior of Hydrogenated Amorphous Carbon Coating Under Lubricated Conditions
Masuko, Masabumi
Kudo, Takuya
Suzuki, Akihito
TRIBOLOGY LETTERS, 2013, 51 (02) : 181 - 190
[6] Tribological properties of three-dimensional braided carbon/Kevlar/epoxy hybrid composites under dry and lubricated conditions
Wan, Y. Z.
Huang, Y.
He, F.
Li, Q. Y.
Lian, J. J.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 452 : 202 - 209
[7] Effect of hard particles on the tribological properties of hydrogenated nitrile butadiene rubber under different lubricated conditions
Hu, Gang
Ma, Jianbo
Yuan, Guangjie
Shen, Kunrong
Wang, Haoyu
TRIBOLOGY INTERNATIONAL, 2022, 169
[8] Comparative Study of Tribological Properties of Ni-P Coatings Under Dry and Lubricated Conditions
Duari, Santanu
Barman, Tapan Kr.
Sahoo, Prasanta
INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 978 - 987
[9] Tribological properties of plasma nitrided AISI 4140 steel under dry and lubricated sliding conditions
Podgornik, B.
Viintin, J.
TriboTest, 2000, 6 (04): : 357 - 371
[10] Tribological performance of quaternary CrSiCN coatings under dry and lubricated conditions
Lorenzo-Martin, C.
Ajayi, O.
Erdemir, A.
Wei, R.
WEAR, 2017, 376 : 1682 - 1690

← 1 2 3 4 5 →