Formation of counter flow jet resulting from impingement of multiple jets radially injected in a crossflow

被引：27
|
作者：
Kartaev, E. V. [1 ]
Emelkin, V. A. [1 ]
Ktalkherman, M. G. [1 ]
Aulchenko, S. M. [1 ]
Vashenko, S. P. [1 ]
Kuzmin, V. I. [1 ]
机构：
[1] Russian Acad Sci, Siberian Branch, Khristianovich Inst Theoret & Appl Mech, Novosibirsk 630090, Russia
来源：
EXPERIMENTAL THERMAL AND FLUID SCIENCE | 2015年 / 68卷
关键词：
Radial injection; Impinging jets; Crossflow; Counter flow jet; Penetration depth; Upstream premixing; OPTIMIZATION; GEOMETRY; PYROLYSIS; MIXER;
D O I：
10.1016/j.expthermflusci.2015.05.009
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The process of formation of a counter jet as a result of impinging of jets radially injected into a confined crossflow of cylindrical duct was studied experimentally and numerically. The axial temperature distributions upstream of the jet injection plane were measured at various jets/crossflow mass flow rates, also near the jet injection plane. Obtained data were analyzed, the conditions of formation of the jet toward the main flow were determined. The point estimates of axial and radial mixing fractions in overpenetration mode with counter jet formation have been obtained. Experimental data are in satisfactory agreement with the numerical analysis results. (C) 2015 Elsevier Inc. All rights reserved.
引用
收藏
页码：310 / 321
页数：12
相关论文
共 50 条
  • [1] Upstream penetration behavior of the developed counter flow jet resulting from multiple jet impingement in the crossflow of cylindrical duct
    Kartaev, E. V.
    Emelkin, V. A.
    Ktalkherman, M. G.
    Aulchenko, S. M.
    Vashenko, S. P.
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 116 : 1163 - 1178
  • [2] Analysis of mixing of impinging radial jets with crossflow in the regime of counter flow jet formation
    Kartaev, E. V.
    Emel'kin, V. A.
    Ktalkherman, M. G.
    Kuz'min, V. I.
    Aul'chenko, S. M.
    Vashenko, S. P.
    [J]. CHEMICAL ENGINEERING SCIENCE, 2014, 119 : 1 - 9
  • [3] CFD modelling of flow and mixing characteristics for multiple rows jets injected radially into a non-reacting crossflow
    Elattar, H. F.
    Fouda, A.
    Bin-Mahfouz, Abdullah S.
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2016, 30 (01) : 185 - 198
  • [4] CFD modelling of flow and mixing characteristics for multiple rows jets injected radially into a non-reacting crossflow
    H. F. Elattar
    A. Fouda
    Abdullah S. Bin-Mahfouz
    [J]. Journal of Mechanical Science and Technology, 2016, 30 : 185 - 198
  • [5] A STUDY OF WALL JETS RESULTING FROM SINGLE AND MULTIPLE INCLINED JET IMPINGEMENT
    MILLER, P
    [J]. AERONAUTICAL JOURNAL, 1995, 99 (986): : 201 - 216
  • [6] FLOW CHARACTERISTICS OF TURBULENT JETS INJECTED OBLIQUELY IN CROSSFLOW
    Guo Ting-ting
    Li Shao-hua
    Xu Zhong
    [J]. JOURNAL OF HYDRODYNAMICS, 2004, 16 (03) : 312 - 315
  • [7] FLOW CHARACTERISTICS OF TURBULENT JETS INJECTED OBLIQUELY IN CROSSFLOW
    GUO Tingting
    [J]. Journal of Hydrodynamics, 2004, (03) : 312 - 315
  • [8] NUMERICAL STUDY ON FLOW CHARACTERISTICS OF A SINGLE JET AND MULTIPLE TANDEM JETS IN CROSSFLOW
    Xiao, Y.
    Tang, H. W.
    Liang, D. F.
    Zhang, J. D.
    [J]. PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON APAC 2011, 2012,
  • [9] Flow measurements of jet impingement upon a semicylinder with crossflow
    Alvarez, A.
    Trevino, C.
    Perez-Flores, F.
    Martinez-Suastegui, L.
    [J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2023, 255
  • [10] Flow field in a hot air jet impingement oven - Part II: Multiple impingement jets
    Marcroft, HE
    Chandrasekaran, M
    Karwe, MV
    [J]. JOURNAL OF FOOD PROCESSING AND PRESERVATION, 1999, 23 (03) : 235 - 248
12345