Uneven microstructure in ZK60 alloy as a core of AZ31/ZK60 composite rods

被引：4
|
作者：
Chang, L. L. [1 ]
Su, X. J. [1 ]
Qin, J. L. [1 ]
机构：
[1] Shandong Univ, Sch Mat Sci & Engn, Jinan 250061, Shandong, Peoples R China
来源：
MATERIALS LETTERS | 2022年 / 325卷
关键词：
Metallic composites; Microstructure; Recrystallization; EMPIRICAL MODE DECOMPOSITION; STRESS-STRAIN CURVE; STEEL;
D O I：
10.1016/j.matlet.2022.132666
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
AZ31/ZK60 bimetal rods were fabricated via co-extrusion of hybrid billets with ZK60 core prepared by different styles. Uneven microstructures were revealed in ZK60 core of AZ31/ZK60 composite rods prepared by pouring melt (ZK60-melt) into AZ31 sleeve and casting to be ingots to fit AZ31 sleeve (ZK60-ingot) followed by coextrusion. Compared with the microstructure composed of equiaxed coarse and fine grains in ZK60-melt after co-extrusion, a mixed grain structure with large elongated grains and fine equiaxed grains was observed in ZK60ingot core in the composite rod. During aging at 180 degrees C for 12 h abnormal grain growth (AGG) was revealed in ZK60-melt core, but the uneven structure in ZK60-ingot remained thermally stable. Mechanical properties of AZ31/ZK60 composite rods with both ZK60-melt and ZK60-ingot cores were improved significantly by aging.
引用
收藏
页数：8
相关论文
共 50 条
  • [1] Creep Behavior of ZK60 Alloy and ZK60/SiCw Composite After Extrusion and Precipitation Hardening
    Tayebi, Morteza
    Najafi, Hamidreza
    Nategh, Said
    Khodabandeh, Alireza
    METALS AND MATERIALS INTERNATIONAL, 2021, 27 (10) : 3905 - 3917
  • [2] Creep Behavior of ZK60 Alloy and ZK60/SiCw Composite After Extrusion and Precipitation Hardening
    Morteza Tayebi
    Hamidreza Najafi
    Said Nategh
    Alireza Khodabandeh
    Metals and Materials International, 2021, 27 : 3905 - 3917
  • [3] Effect of large deformation on microstructure of ZK60 alloy
    Lin Jin-bao
    Wang Qu-dong
    Chen Yong-jun
    Zhang Lu-jun
    Ding Wen-jiang
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2006, 16 : S1750 - S1753
  • [4] Effect of large deformation on microstructure of ZK60 alloy
    林金保
    王渠东
    陈永军
    张陆军
    丁文江
    Transactions of Nonferrous Metals Society of China, 2006, (S3) : 1750 - 1753
  • [5] Observation of high-strain-rate superplasticity in ZK60 and SiCp/ZK60 composite
    Watanabe, H
    Mukai, T
    Nieh, TG
    Higashi, K
    TOWARDS INNOVATION IN SUPERPLASTICITY II, 1999, 304-3 : 297 - 302
  • [6] Microstructure and mechanical properties of AZ31 and ZK60 magnesium alloys processed by open die forging
    Chino, Yasumasa
    Shimojima, Koji
    Yamada, Yasuo
    Wen, Cui'e
    Mabuchi, Mamoru
    Zairyo/Journal of the Society of Materials Science, Japan, 2001, 50 (11) : 1228 - 1232
  • [7] Die geometry influence on the texture and microstructure development during extrusion of AZ31 and ZK60 magnesium alloy chips
    Hendriok, Leo
    Nienaber, Maria
    Kurz, Gerrit
    Ben Khalifa, Noomane
    MATERIALS & DESIGN, 2025, 249
  • [8] SUPERPLASTICITY IN SiCw/ZK60 COMPOSITE
    F.Yan
    K.Wu
    M.Zhao
    ActaMetallurgicaSinica(EnglishLetters), 2003, (03) : 217 - 220
  • [9] Superplasticity in SiCW/ZK60 composite
    Yan, F.
    Wu, K.
    Zhao, M.
    Acta Metallurgica Sinica (English Letters), 2003, 16 (03) : 217 - 220
  • [10] Grain refinement of AZ31 and ZK60 Mg alloys - towards superplasticity studies
    Bussiba, A
    Ben Artzy, A
    Shtechman, A
    Ifergan, S
    Kupiec, M
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 302 (01): : 56 - 62
12345