On the cyclic behavior of 304L and 316L stainless steels

被引：2
|
作者：
Taleb, Lakhdar [1 ]
机构：
[1] INSA GPM UMR 6634, St Etienne, France
来源：
ADVANCES IN ENGINEERING PLASTICITY XI | 2013年 / 535-536卷
关键词：
austenitic steels; cyclic behavior; ratcheting; time-dependent behavior;
D O I：
10.4028/www.scientific.net/KEM.535-536.201
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This work is devoted to a survey of the ratcheting phenomenon and follows the study presented in [1]. Two current austenitic stainless steels 304L and 316L are considered and tested under cyclic stress and strain control at 350 degrees C. Under stress control ratcheting seems very small under proportional as well as non-proportional stress control. The elastic shakedown steady state exhibited by both materials may be explained by their capabilities to develop very significant cyclic hardening (especially isotropic) at 350 degrees C.
引用
收藏
页码：201 / 204
页数：4
相关论文
共 50 条
  • [1] Modelling of cyclic plasticity for austenitic stainless steels 304L, 316L, 316L(N)-IG
    Dalla Palma, Mauro
    [J]. FUSION ENGINEERING AND DESIGN, 2016, 109 : 20 - 25
  • [2] IASCC susceptibility of type 304, 304L and 316L stainless steels
    Tanaka, Y
    Suzuki, S
    Fukuya, K
    Sakamoto, H
    Kodama, M
    Nishimura, S
    Nakata, K
    Kato, T
    [J]. PROCEEDINGS OF THE EIGHTH INTERNATIONAL SYMPOSIUM ON ENVIRONMENTAL DEGRADATION OF MATERIALS IN NUCLEAR POWER SYSTEMS - WATER REACTORS, VOLS 1 AND 2, 1997, : 803 - 811
  • [3] Experimental and numerical analysis about the cyclic behavior of the 304L and 316L stainless steels at 350 °C
    Taleb, Lakhdar
    Cailletaud, Georges
    Sai, Kacem
    [J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2014, 61 : 32 - 48
  • [4] Comparative study between duplex stainless steels and austentitic stainless steels 304L/316L
    Senatore, Marcelo
    Finzetto, Leandro
    Perea, Eduardo
    [J]. REM-REVISTA ESCOLA DE MINAS, 2007, 60 (01) : 175 - 181
  • [5] Effect of Nitrate and Sulfate on Atmospheric Corrosion of 304L and 316L Stainless Steels
    Cook, Angus J. M. C.
    Padovani, Cristiano
    Davenport, Alison J.
    [J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2017, 164 (04) : C148 - C163
  • [6] Investigation of the corrosion behavior of 304L and 316L stainless steels at high-temperature borated and lithiated water
    Duan, Zhengang
    Arjmand, Farzin
    Zhang, Lefu
    Abe, Hiroaki
    [J]. JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 2016, 53 (09) : 1435 - 1446
  • [7] Considerations for the weldability of types 304L and 316L stainless steel
    Korinko P.S.
    Malene S.H.
    [J]. Practical Failure Analysis, 2001, 1 (4) : 61 - 68
  • [8] A STUDY ON CREVICE CORROSION OF AISI 316L, AISI 304L AND AISI 444 STAINLESS STEELS
    Bellezze, T.
    Quaranta, A.
    Roventi, G.
    Fratesi, R.
    [J]. METALLURGIA ITALIANA, 2008, (01): : 7 - 11
  • [9] Texture evolution of warm-rolled and annealed 304L and 316L austenitic stainless steels
    Lindell, D.
    [J]. 17TH INTERNATIONAL CONFERENCE ON TEXTURES OF MATERIALS (ICOTOM 17), 2015, 82
  • [10] Tribo-Behavior and Corrosion Properties of Welded 304L and 316L Stainless Steel
    Abdo, Hany S.
    Seikh, Asiful H.
    Alharbi, Hamad F.
    Mohammed, Jabair Ali
    Soliman, Mahmoud S.
    Fouly, Ahmed
    Ragab, Sameh A.
    [J]. COATINGS, 2021, 11 (12)
12345