Investigation into Roughness of Surface Polished by Abrasive Waterjet with Taguchi Method and Dimensional Analysis

被引：8
|
作者：
Chen, Tianxiang [1 ]
Wang, Chengyong [1 ]
机构：
[1] Guangdong Univ Technol, Fac Electromech Engn, Guangzhou 510006, Guangdong, Peoples R China
来源：
HIGH SPEED MACHINING V | 2012年 / 723卷
关键词：
Abrasive waterjet polishing; surface roughness; Taguchi method; dimensional analysis; CERAMICS; MODELS;
D O I：
10.4028/www.scientific.net/MSF.723.188
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Abrasive water jet was utilized to polish the 40CrMnMo7 mold steel and BK7 glass in this experiment designed by Taguchi method. The influence of polishing parameters on the polishing quality, their significance order, and the optimum polishing parameters were analyzed and reported. With the experimental data, the mathematic molds of surface roughness of polished workpieces were created by dimensional analysis, and then they were validated by the test experiment.
引用
收藏
页码：188 / 195
页数：8
相关论文
共 50 条
  • [1] An investigation on surface roughness of granite machined by abrasive waterjet
    Aydin G.
    Karakurt I.
    Aydiner K.
    [J]. Bulletin of Materials Science, 2011, 34 (4) : 985 - 992
  • [2] An investigation on surface roughness of granite machined by abrasive waterjet
    Aydin, Gokhan
    Karakurt, Izzet
    Aydiner, Kerim
    [J]. BULLETIN OF MATERIALS SCIENCE, 2011, 34 (04) : 985 - 992
  • [3] Experimental Investigation of Surface Roughness for Different Thickness of Aluminum in Abrasive Waterjet Machining
    Zahoor, Sadaf
    Shehzad, Adeel.
    Case, Keith
    Hussain, Amjad
    Zahoor, Zain
    Waqar Shoaib, Muhammad
    [J]. ADVANCES IN MANUFACTURING TECHNOLOGY XXXI, 2017, 6 : 9 - 14
  • [4] FACTOR ANALYSIS OF THE ABRASIVE WATERJET FACTORS AFFECTING THE SURFACE ROUGHNESS OF TITANIUM
    Monkova, Katarina
    Monka, Peter
    Vegnerova, Petra
    Cep, Robert
    Muellerova, Jana
    Brazina, David
    Duspara, Miroslav
    [J]. TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2011, 18 (01): : 73 - 77
  • [5] A study on surface roughness in abrasive waterjet machining process using artificial neural networks and regression analysis method
    Caydas, Ulas
    Hascalik, Ahmet
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 202 (1-3) : 574 - 582
  • [6] Exploration on Kerf-angle and Surface Roughness in Abrasive Waterjet Machining using Response Surface Method
    Babu M.N.
    Muthukrishnan N.
    [J]. Babu, Munuswamy Naresh (narsavi@gmail.com), 2018, Springer (99) : 645 - 656
  • [7] Application of the Taguchi method to areal roughness-based surface topography control by waterjet treatments
    Xie, Jing
    Qiao, Yang
    Wang, Zu 'an
    Qi, Yuanshen
    Xu, Qingfeng
    Shemtov-Yona, Keren
    Chen, Pengwan
    Rittel, Daniel
    [J]. APPLIED SURFACE SCIENCE ADVANCES, 2024, 19
  • [8] Effect of feed rate on surface roughness in abrasive waterjet cutting applications
    Akkurt, A
    Kulekci, MK
    Seker, U
    Ercan, F
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 147 (03) : 389 - 396
  • [9] Prediction of surface roughness of titanium alloy in abrasive waterjet machining process
    Ting, Ho Yi
    Asmelash, Mebrahitom
    Azhari, Azmir
    Alemu, Tamiru
    Saptaji, Kushendarsyah
    [J]. INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2022, 16 (01): : 281 - 289
  • [10] Prediction of surface roughness of titanium alloy in abrasive waterjet machining process
    Ho Yi Ting
    Mebrahitom Asmelash
    Azmir Azhari
    Tamiru Alemu
    Kushendarsyah Saptaji
    [J]. International Journal on Interactive Design and Manufacturing (IJIDeM), 2022, 16 : 281 - 289
12345