Polypropylene/styrene-ethylene-butylene-styrene thermoplastic elastomer nanocomposite films

被引:2
|
作者
Small, Christopher M. [1 ]
McNally, Gerard M.
McShane, Paul
Kenny, Ian
机构
[1] Queens Univ Belfast, Polymer Proc Res Ctr, Belfast BT9 5AH, Antrim, North Ireland
[2] Colorite Europe Ltd, Belfast BT17 OQL, Antrim, North Ireland
来源
关键词
Carbon dioxide - Clay - Hardness - Nanocomposites - Polymer blends - Polypropylenes - Thin films;
D O I
10.1002/vnl.20096
中图分类号
O69 [应用化学];
学科分类号
081704 ;
摘要
Nanocomposite (polypropylene/styrene-ethylene-butylene-styrene/organoclay) films were sheet-extruded with differing clay concentrations. Blends were compounded using a high shear single screw reciprocating kneader. Results demonstrated that higher clay content increased the Shore A hardness of the films but induced a significant improvement in both O-2 and CO2 barrier performance.
引用
收藏
页码:46 / 52
页数:7
相关论文
共 50 条
  • [1] A Morphological Study of Dynamically Vulcanized Styrene-Ethylene-Butylene-Styrene/Styrene-Butylene-Styrene/MethylVinylSilicon Rubber Thermoplastic Elastomer
    Zhao, Chunxu
    Chen, Xiaohan
    Chen, Xian
    POLYMERS, 2022, 14 (09)
  • [2] Production and characterization of thermoplastic elastomer foams based on the styrene-ethylene-butylene-styrene (SEBS) rubber and thermoplastic material
    Kiroglu, Ceren
    Kizilcan, Nilgun
    OPEN CHEMISTRY, 2021, 19 (01): : 929 - 937
  • [3] A Morphological Study of Isotactic Polypropylene (iPP) Blended with Styrene-ethylene-butylene-styrene (SEBS) Thermoplastic Elastomers
    Buggy, M.
    Ryan, E. A.
    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO, 2010, 1315 : 131 - +
  • [4] Upgrading Toughness and the Glass Transition Temperature of Polydicyclopentadiene upon Addition of Styrene-Ethylene-Butylene-Styrene Thermoplastic Elastomer
    Beuguel, Quentin
    Kirillov, Evgueni
    Carpentier, Jean-Francois
    Guillaume, Sophie M.
    ACS APPLIED POLYMER MATERIALS, 2022, 4 (04) : 2251 - 2255
  • [5] Electrical conductivity and tensile properties of carbon nanotube reinforced styrene-ethylene-butylene-styrene thermoplastic elastomer nanocomposites
    Zhu, Ping
    Chow, Wen Shyang
    Rusli, Arjulizan
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2023, 36 (09) : 3552 - 3565
  • [6] Effect of poly(styrene-ethylene-butylene-styrene) block copolymer on thermomechanical properties and morphology of polypropylene/poly(styrene-ethylene-butylene-styrene)/polycarbonate ternary blends
    Soltanolkottabi, Fariba
    Moini Jazani, Omid
    Shokoohi, Shirin
    JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 2020, 26 (04): : 502 - 510
  • [7] Electrical Properties of Polypropylene/Styrene-Ethylene-Butylene-Styrene Block Copolymer/MgO Nanocomposites
    Zha, Jun-Wei
    Wang, Ying
    Li, Wei-Kang
    Wang, Si-Jiao
    Dang, Zhi-Min
    IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, 2017, 24 (03) : 1457 - 1464
  • [8] Rheology and foaming behaviour of styrene-ethylene-butylene-styrene nanocomposites
    Banerjee, Ritima
    Ray, Suprakas Sinha
    Ghosh, Anup Kumar
    COLLOID AND POLYMER SCIENCE, 2021, 299 (03) : 481 - 496
  • [9] Recovery of the mechanical properties of recycled styrene-ethylene-butylene-styrene/polypropylene (SEBS/PP) composites
    Park M.-H.
    Toxicology and Environmental Health Sciences, 2015, 7 (5) : 277 - 281
  • [10] Influence of ozone on styrene-ethylene-butylene-styrene (SEBS) copolymer
    Allen, NS
    Edge, M
    Mourelatou, D
    Wilkinson, A
    Liauw, CM
    Parellada, MD
    Barrio, JA
    Quiteria, VRS
    POLYMER DEGRADATION AND STABILITY, 2003, 79 (02) : 297 - 307