Incremental forming: an innovative process for small batch production

被引：2
|
作者：
Tisza, Miklos [1 ]
Kovacs, Peter Zoltan [1 ]
Lukacs, Zsolt [1 ]
机构：
[1] Univ Miskolc, Dept Mat Proc Technol, H-3515 Miskolc, Hungary
来源：
MATERIALS SCIENCE, TESTING AND INFORMATICS VI | 2013年 / 729卷
关键词：
incremental forming; innovative small batch production;
D O I：
10.4028/www.scientific.net/MSF.729.85
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The need for flexible forming processes is of utmost importance in the recent years. Therefore, it is very important to develop new innovative technologies and processes. This is particularly valid for small batch and prototype production. Incremental sheet metal forming may be regarded as one of the promising developments for these purposes. In this paper, first a general overview of main process characteristics of the incremental sheet metal forming will be given. Then some recent results of a joint Eureka project launched by two universities and two SME companies in Hungary and Slovenia will be presented.
引用
收藏
页码：85 / 90
页数：6
相关论文
共 50 条
  • [1] Incremental Sheet Forming (ISF) as small batch production method
    Tuomi, J.
    Vihtonen, L.
    [J]. VIRTUAL AND RAPID MANUFACTURING: ADVANCED RESEARCH IN VIRTUAL AND RAPID PROTOTYPING, 2008, : 611 - 616
  • [2] Review on the development of a hybrid incremental sheet forming system for small batch sizes and individualized production
    Araghi B.T.
    Göttmann A.
    Bambach M.
    Hirt G.
    Bergweiler G.
    Diettrich J.
    Steiners M.
    Saeed-Akbari A.
    [J]. Production Engineering , 2011, 5 (4) : 393 - 404
  • [3] Review on the development of a hybrid incremental sheet forming system for small batch sizes and individualized production
    Araghi, B. Taleb
    Goettmann, A.
    Bambach, M.
    Hirt, G.
    Bergweiler, G.
    Diettrich, J.
    Steiners, M.
    Saeed-Akbari, A.
    [J]. PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT, 2011, 5 (04): : 393 - 404
  • [4] ANALYSIS OF INNOVATIVE INCREMENTAL COLD FORMING PROCESS FOR THE MANUFACTURING OF AEROSPACE ROTATING PARTS
    Perez, Marcos
    [J]. PROCEEDINGS OF THE ASME 12TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2017, VOL 1, 2017,
  • [5] Friction-Spinning - An Innovative Incremental Forming Process for the Manufacture of Functional Graded Parts
    Homberg, W.
    Lossen, B.
    Struwe, A.
    [J]. CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3, 2013, 554-557 : 1368 - 1374
  • [6] Innovative metamodelling-based process design for manufacturing: an application to Incremental Sheet Forming
    Giuseppina Ambrogio
    Claudio Ciancio
    Luigino Filice
    Francesco Gagliardi
    [J]. International Journal of Material Forming, 2017, 10 : 279 - 286
  • [7] Innovative metamodelling-based process design for manufacturing: an application to Incremental Sheet Forming
    Ambrogio, Giuseppina
    Ciancio, Claudio
    Filice, Luigino
    Gagliardi, Francesco
    [J]. INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2017, 10 (03) : 279 - 286
  • [8] MECHANIZATION OF ASSEMBLY PROCESS IN MEDIUM AND SMALL BATCH PRODUCTION
    ASHLEY, JR
    [J]. PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL AND PHYSICAL SCIENCES, 1970, 317 (1531): : 455 - &
  • [9] The research of single point incremental forming process for composite mould production
    Rimasauskas, M.
    Juzenas, K.
    Rimasauskiene, R.
    Pupelis, E.
    [J]. MECHANIKA, 2014, (04): : 414 - 419
  • [10] Study on the method of small batch production process control
    Ge, XQ
    Liu, Y
    [J]. ICIM' 2004: PROCEEDINGS OF THE SEVENTH INTERNATIONAL CONFERENCE ON INDUSTRIAL MANAGEMENT, 2004, : 238 - 242
12345