user

Load-carrying behaviour of dowel-type timber connections with multiple slotted-in steel plates

被引：5
|
作者：
Fan, Xinhai [1 ]
Zhang, Shengdong [1 ]
Qu, Wenjun [1 ]
机构：
[1] Tongji Univ, Dept Bldg Engn, Shanghai 200092, Peoples R China
来源：
ADVANCES IN STRUCTURAL ENGINEERING, PTS 1-3 | 2011年 / 94-96卷
关键词：
Dowel-type connection; Multiple slotted-in steel plate; Load carrying capacity; Failure mode;
D O I：
10.4028/www.scientific.net/AMM.94-96.43
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
The multiple-shear dowel connection with slotted-in steel plates is one of the most efficient joints for large cross section timber structures. Experiments were performed on dowel-type timber connections with one, two and three slotted in steel plates under lateral loads parallel to the grain. Test variables include the number of steel plates, the spacing of the steel plates, and the dowel diameter. Results show that the load-carrying capacity of the dowel-type connection increased as the number and spacing of steel plates in the same thickness of timber specimens. Finally, a model of the load-carrying capacity of multiple shear steel-to-timber connections is presented, which showed good agreement with the results obtained in the experiment.
引用
收藏
页码：43 / 47
页数：5
相关论文
共 50 条
  • [1] Influence Factors on the Load-Carrying Capacity of Bolted Timber Connections with Slotted-In Steel Plates
    Cao, Jixing
    Liu, Yingyang
    Liu, Qiang
    Liu, Xiaoyan
    Qian, Hui
    [J]. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2023, 35 (05)
  • [2] Estimation of shear strength of dowel-type timber connections with multiple slotted-in steel plates by European yield theory
    Sawata, Kei
    Sasaki, Takanobu
    Kanetaka, Satoru
    [J]. JOURNAL OF WOOD SCIENCE, 2006, 52 (06) : 496 - 502
  • [3] Estimation of shear strength of dowel-type timber connections with multiple slotted-in steel plates by European yield theory
    Kei Sawata
    Takanobu Sasaki
    Satoru Kanetaka
    [J]. Journal of Wood Science, 2006, 52 : 496 - 502
  • [4] Splitting load-carrying capacity of steel-to-laminated bamboo dowel connections with slotted-in steel plates
    Xu, Ming
    Cui, Zhaoyan
    Lam, Frank
    Xu, Qingfeng
    Chen, Zhongfan
    [J]. JOURNAL OF BUILDING ENGINEERING, 2021, 42
  • [5] Brittle failure in the parallel-to-grain direction of multiple shear softwood timber connections with slotted-in steel plates and dowel-type fasteners
    Yurrita, Miguel
    Manuel Cabrero, Jose
    Quenneville, Pierre
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2019, 216 : 296 - 313
  • [6] Behaviour of small-scale glulam timber connections with slotted-in steel plates and dowel-type fasteners reinforced with self-tapping screws
    Breijinck, Thomas
    Woods, Joshua E.
    Macdougall, Colin
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2023, 402
  • [7] Stiffness and slip in multi-dowel timber connections with slotted-in steel plates
    Reynolds, Thomas P. S.
    Miranda, Will
    Trabucco, Dario
    Toumpanaki, Eleni
    Foster, Robert M.
    Ramage, Michael H.
    [J]. ENGINEERING STRUCTURES, 2022, 268
  • [8] Load-carrying capacity of timber-concrete joints with Dowel-type fasteners
    Dias, A. M. P. G.
    Lopes, S. M. R.
    Van de Kuilen, J. W. G.
    Cruz, H. M. P.
    [J]. JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 2007, 133 (05): : 720 - 727
  • [9] Experiments on dowel-type timber connections
    Dorn, Michael
    de Borst, Karin
    Eberhardsteiner, Josef
    [J]. ENGINEERING STRUCTURES, 2013, 47 : 67 - 80
  • [10] Assessment of the failure behaviour and reliability of timber connections with multiple dowel-type fasteners
    Jockwer, Robert
    Fink, Gerhard
    Kohler, Jochen
    [J]. ENGINEERING STRUCTURES, 2018, 172 : 76 - 84
12345