Thermal Cycling Toughness and Strength Estimation of Cryogenic Filled Tank

被引：0
|
作者：
Uglanov, Dmitry [1 ]
Sarmin, Dmitry [1 ]
Akulova, Alina [1 ]
Aksenova, Daria [1 ]
Panshin, Roman [1 ]
机构：
[1] Samara Univ, Dept Heat Engn & Heat Engines, Moskovskoye Shosse 34, Samara 443086, Russia
来源：
2018 2ND INTERNATIONAL CONFERENCE ON MECHANICAL, MATERIAL AND AEROSPACE ENGINEERING (2MAE 2018) | 2018年 / 179卷
关键词：
D O I：
10.1051/matecconf/201817901014
中图分类号：
V [航空、航天];
学科分类号：
08 ; 0825 ;
摘要：
At present, technologies based on liquid natural gas (LNG) using start to find a wide use. They also demand technologies of working fluid storage and transportation in cryogenic liquid condition. The working fluid will be used after its regasification from cryogenic liquid condition. When the gas cylinder is filled with gas, there is a danger of exceeding the temperature stresses in the cylinder walls. For the study, there is a method for calculating unsteady thermal conductivity for studying the temperature stresses in the wall of a gas cylinder during its interaction with an evaporating cryogen. This method is used for determining the thermoelastic stresses of the cryogenic filled tank. The CAE- calculation of the strength of the cryogenic filled tank is also done.
引用
收藏
页数：8
相关论文
共 50 条
  • [1] Estimation of the energy efficiency of cryogenic filled tank use in different systems and devices
    Blagin, E. V.
    Dovgyallo, A. I.
    Nekrasova, S. O.
    Sarmin, D. V.
    Uglanov, D. A.
    APPLIED THERMAL ENGINEERING, 2016, 101 : 537 - 544
  • [2] ESTIMATION OF ELASTIC BUCKLING STRENGTH OF A NON -SPHERICAL TANK IN THE PARTIALLY FILLED CONDITION
    Sano, Atsushi
    Matsubara, Naoya
    Izumi, Naruyoshi
    Fujikubo, Masahiko
    PROCEEDINGS OF THE ASME 36TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2017, VOL 3B, 2017,
  • [3] Thermal analysis of cryogenic tank saddle
    Yang, Minzhi
    Gu, Anzhong
    Xu, Wen
    Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 1995, 29 (05): : 47 - 54
  • [4] Strength and stability analysis of a cryogenic storage tank
    Liang, X. L.
    Qian, C. F.
    2ND INTERNATIONAL WORKSHOP ON MATERIALS SCIENCE AND MECHANICAL ENGINEERING (IWMSME2018), 2019, 504
  • [5] THERMAL STRESSES IN COMPOSITE WALL OF A CRYOGENIC TANK
    BERDELMA.HA
    MECHANICAL ENGINEERING, 1965, 87 (07) : 58 - &
  • [6] FRACTURE TOUGHNESS OF CRYOGENIC ALLOYS AND DETERMINATION OF THEIR STRUCTURAL STRENGTH
    ALYMOV, VT
    ALEKSEEV, SI
    KOZELKIN, VV
    MOZHAEV, AV
    METAL SCIENCE AND HEAT TREATMENT, 1976, 18 (7-8) : 699 - 703
  • [7] Enhancement of plasticity for FeCoBSiNb bulk metallic glass with superhigh strength through cryogenic thermal cycling
    Di, Siyi
    Wang, Qianqian
    Zhou, Jing
    Shen, Yiyang
    Li, Jiaqi
    Zhu, Mingyun
    Yin, Kuibo
    Zeng, Qiaoshi
    Sun, Litao
    Shen, Baolong
    SCRIPTA MATERIALIA, 2020, 187 : 13 - 18
  • [8] CRYOGENIC AND THERMAL CYCLING BEHAVIOR OF ADHESIVE MATERIALS
    RIX, C
    EASTLAND, C
    ADVANCED MATERIALS : THE BIG PAYOFF, 1989, 21 : 21 - 32
  • [9] STUDY ON FRACTURE-TOUGHNESS OF SHEET METALS FOR CRYOGENIC LIQUID PROPELLANT TANK
    TERADA, H
    NAKAI, E
    KAKUTA, Y
    TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES, 1979, 21 (54) : 182 - 193
  • [10] ESTIMATION OF STRENGTH AND FRACTURE TOUGHNESS FOR NANOMATERIALS
    Hwu, Chyanbin
    Yeh, Yu-Kuei
    20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
12345