Wear and tool life of tungsten carbide, PCBN and PCD cutting tools

被引：166
|
作者：
Arsecularatne, JA [1 ]
Zhang, LC
Montross, C
机构：
[1] Univ Sydney, Sch Aerosp Mech & Mechatron Engn, Sydney, NSW 2006, Australia
[2] Ringwood Superabras Pty Ltd, Fyshwick, ACT 2609, Australia
来源：
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2006年 / 46卷 / 05期
基金：
澳大利亚研究理事会;
关键词：
tool wear; tool life; tool temperature; tungsten carbide; PCBN; PCD;
D O I：
10.1016/j.ijmachtools.2005.07.015
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The wear mechanisms of cutting tools made of tungsten-carbide (WC), PCBN and PCD were investigated using the tool life and temperature results available in the literature. For tool/work combinations WC/steel and PCBN/hardened-steel, under practical conditions, tool wear was found to be greatly influenced by the temperature. It was concluded that the most likely dominant tool wear mechanism for WC is diffusion and that for PCBN is chemical wear. For PCD, more experimental results and hence further research is required to determine the dominant wear mechanism. (c) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码：482 / 491
页数：10
相关论文
共 50 条
  • [1] Practical machining of cemented tungsten carbide using PCD and PCBN cutting tools
    Collier, M
    Cheynet, J
    EURO PM 2002: HARD MATERIALS PROCEEDINGS, 2002, : 161 - 166
  • [2] Influence of cutting parameters on PCD tool wear during milling tungsten carbide
    Li, Hao
    Zhao, Wei
    Gao, Xutao
    Shi, Weiqi
    He, Ning
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 130 (1-2): : 985 - 993
  • [3] Influence of cutting parameters on PCD tool wear during milling tungsten carbide
    Hao Li
    Wei Zhao
    Xutao Gao
    Weiqi Shi
    Ning He
    The International Journal of Advanced Manufacturing Technology, 2024, 130 : 1165 - 1180
  • [4] Tool wear in laser ultrasonically combined turning of tungsten carbide with PCD tools
    Zhang, Changjuan
    Jiao, Feng
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 111 (7-8): : 2201 - 2213
  • [5] Tool wear in laser ultrasonically combined turning of tungsten carbide with PCD tools
    Changjuan Zhang
    Feng Jiao
    The International Journal of Advanced Manufacturing Technology, 2020, 111 : 2201 - 2213
  • [6] Finish grinding of PCD and PCBN cutting tools
    Turco, M
    Sigwart, K
    Boyle, S
    Schoner, H
    FINISHING OF ADVANCED CERAMICS AND GLASSES, 1999, 102 : 57 - 66
  • [7] The economics of rapid grinding of PCD and PCBN cutting tools
    Butler-Smith, P
    INDUSTRIAL DIAMOND REVIEW, 2003, (01): : 20 - +
  • [8] Induction brazing of tungsten carbide, PCD and PCBN tools with the two-point pyrometer technique
    iew Induktive Erwärmungsanlagen GmbH, Brunn am Gebirge, Austria
    Ind Diamond Rev, 2006, 2 (57-58):
  • [9] CBN tool wear in ductile cutting of tungsten carbide
    Liu, K
    Li, XP
    Rahman, M
    Liu, XD
    WEAR, 2003, 255 : 1344 - 1351
  • [10] Induction brazing of tungsten carbide, PCD and PCBN tools with the two-point pyrometer technique
    Schweikhart, M
    INDUSTRIAL DIAMOND REVIEW, 2006, (02): : 57 - 58
12345