PRETENSION ANALYSIS FOR PIEZOELECTRIC STACK ACTUATOR IN NANO-POSITIONING STAGE

被引:0
|
作者
Zhang, Meng [1 ]
Liu, Zhigang [1 ]
Bu, Mingfan [1 ]
Zhu, Yu [2 ]
机构
[1] Xi An Jiao Tong Univ, Sch Mech Engn, Xian, Shaanxi, Peoples R China
[2] Xi An Jiao Tong Univ, State Key Lab Mfg Syst Engn, Xian, Shaanxi, Peoples R China
基金
中国国家自然科学基金;
关键词
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Taking advantages of high stiffness, fast response, high bandwidth as well as large pushing force capability, piezoelectric stack actuators have been widely used in the fields of high speed nano-positioning stages and precision systems. An inevitable disadvantage of piezoelectric actuators is that they are highly intolerant to shear and tensile forces. During high speed scanning operations, the inertial forces due to the effective mass of the stage may cause the actuators to withstand excessive shear or tension forces. To protect the actuators, preload is often applied to compensate for these forces. Flexures have been used to supply preload to the piezoelectric stack actuators in many high-speed nano-positioning stages. Nevertheless, for nano-positioning stages with stiff flexures, it is a difficult job to displace the flexures and slide the actuators in place to preload them. This paper proposed a novel preloading nano-positioning stage which allows the piezoelectric stack actuator to be preloaded and mounted easily without obviously reducing the stiffness and speed of the nano positioning stage. A preloading nano-positioning stage is designed and the flexible hinge and piezoelectric stack actuator of the stage are analyzed. The stiffness and resonance frequency of flexible hinge and optimal preload for the proposed stage is obtained by kinetics analysis. In order to verify the effectiveness of preloading nano-positioning stage, an online test system is established. The system mainly composed by a force sensor module, a capacitive sensor module and the preloading nano-positioning stage. A force sensor is applied between piezoelectric actuator and flexible hinge which can directly measure the preload in real time. The displacement of the flexible hinge is measured by a capacitive sensor to evaluate the positioning accuracy. Experiments are conducted, and the results demonstrate the effectiveness of the proposed approach. Keywords: piezoelectric stack actuators, preload, preloading nano positioning stage, flexible hinge, test system
引用
收藏
页数:8
相关论文
共 50 条
  • [1] Application of piezoelectric actuator in series nano-positioning stage
    Lu, Qian
    Chen, Xifu
    SCIENCE PROGRESS, 2020, 103 (01)
  • [2] Fractional Order Sliding Mode Control for Nano-positioning of Piezoelectric Actuator
    Li, Zicheng
    Zhang, Sai
    Wang, Hou-Neng
    Ruan, Mengxiong
    PROCEEDINGS OF THE 2019 31ST CHINESE CONTROL AND DECISION CONFERENCE (CCDC 2019), 2019, : 1403 - 1408
  • [3] Developments of a piezoelectric actuator with nano-positioning ability operated in bending modes
    Xu, Dongmei
    Liu, Yingxiang
    Liu, Junkao
    Yang, Xiaohui
    Chen, Weishan
    CERAMICS INTERNATIONAL, 2017, 43 : S21 - S26
  • [4] Adaptive feed-forward controller of piezoelectric actuator for micro/nano-positioning
    S K Shome
    A Mukherjee
    P Karmakar
    U Datta
    Sādhanā, 2018, 43
  • [5] Adaptive feed-forward controller of piezoelectric actuator for micro/nano-positioning
    Shome, S. K.
    Mukherjee, A.
    Karmakar, P.
    Datta, U.
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2018, 43 (10):
  • [6] Study on Creep Hysteresis Characteristics of Piezoelectric Ceramics in the Nano-positioning Stage
    Cheng, Xiankai
    Zhong, Jun
    Zha, Qing
    Yu, Yong
    2017 IEEE INTERNATIONAL CONFERENCE ON CYBERNETICS AND INTELLIGENT SYSTEMS (CIS) AND IEEE CONFERENCE ON ROBOTICS, AUTOMATION AND MECHATRONICS (RAM), 2017, : 100 - 104
  • [7] Nano-positioning drive with piezoelectric actuator integrated into support bearing unit of ball screw
    Matsubara, A.
    Fujita, T.
    Kono, D.
    Tanaka, N.
    Watanabe, Y.
    PROCEEDINGS OF THE 35TH INTERNATIONAL MATADOR CONFERENCE: FORMERLY THE INTERNATIONAL MACHINE TOOL DESIGN AND RESEARCH CONFERENCE, 2007, : 323 - +
  • [8] Analysis of Bridge-type Nano-positioning Stage
    Ma, Li
    He, Zhengfeng
    Ouyang, Hangkong
    FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE, PTS 1-4, 2011, 44-47 : 3828 - 3832
  • [9] Design of a Topology Nano-positioning Stage
    Chen, Tao
    Chen, Liguo
    Pan, Mingqiang
    Sun, Lining
    MECHATRONICS AND INTELLIGENT MATERIALS, PTS 1 AND 2, 2011, 211-212 : 891 - 894
  • [10] Structural Design and Analysis of a Nano-Positioning Planar Motion Stage
    Chung, Tien-Tung
    Chu, Chih-Hsiang
    Chian, Hsun-Fu
    Huang, Cheng
    Fan, Kuang-Chao
    Yen, Jia-Yush
    Szu, Kou-I
    2011 9TH WORLD CONGRESS ON INTELLIGENT CONTROL AND AUTOMATION (WCICA 2011), 2011, : 833 - 838