Studies on Parametric Optimization for Fused Deposition Modelling Process

被引：79
|
作者：
Nidagundi, Vijay B. [1 ]
Keshavamurthy, R. [1 ]
Prakash, C. P. S. [1 ]
机构：
[1] Dayananda Sagar Coll Engn, Dept Mech Engn, Bangalore 560078, Karnataka, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2015年 / 2卷 / 4-5期
关键词：
FDM; Taguchi's L-9 orthogonal array; Anova; ABS;
D O I：
10.1016/j.matpr.2015.07.097
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper discusses optimization studies on process parameters for fused deposition modelling (FDM). Layer thickness, Orientation angle and fill angle are the process variables considered for optimization. Ultimate tensile strength, surface roughness, dimensional accuracy and manufacturing time were considered as response parameters. Experiments were designed using well known Taguchi's L-9 orthogonal array, Taguchi's S/N ratio was used to identify optimum parameter values. Effectiveness of each parameter was investigated using analysis of variance. Furthur, performance of optimum conditions were validated by conducting verification experiment. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1691 / 1699
页数：9
相关论文
共 50 条
  • [1] Fused Deposition Modelling and Parametric Optimization of ABS-M30
    Cherkia, Hemant
    Kar, Sasmita
    Singh, Sudhansu Sekhar
    Satpathy, Ashutosh
    [J]. ADVANCES IN MATERIALS AND MANUFACTURING ENGINEERING, ICAMME 2019, 2020, : 1 - 15
  • [2] Parametric optimization of fused deposition modelling process using Grey based Taguchi and TOPSIS methods for an automotive component
    Murugan, R. Sakthivel
    Vinodh, S.
    [J]. RAPID PROTOTYPING JOURNAL, 2021, 27 (01) : 155 - 175
  • [3] Parametric appraisal of fused deposition modelling process using the grey Taguchi method
    Sood, A. K.
    Ohdar, R. K.
    Mahapatra, S. S.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2010, 224 (B1) : 135 - 145
  • [4] Parametric optimization for enhancing process sustainability: evidence from fused deposition modeling process
    Khan, M. Muhshin Aziz
    Saha, Shanta
    Sayem, Ahmed
    [J]. INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, 18 (02): : 801 - 814
  • [5] Parametric optimization for enhancing process sustainability: evidence from fused deposition modeling process
    M. Muhshin Aziz Khan
    Shanta Saha
    Ahmed Sayem
    [J]. International Journal on Interactive Design and Manufacturing (IJIDeM), 2024, 18 : 801 - 814
  • [6] Model-based parameter optimization of a fused deposition modelling process
    Fuhrmann, Marco
    Falk, Bjoern
    Schmitt, Robert
    [J]. 2016 IEEE INTERNATIONAL SYMPOSIUM ON INTELLIGENT CONTROL (ISIC), 2016, : 699 - 704
  • [7] Parametric optimization of sand-casting pattern fabricated using fused deposition modelling
    N. Ganesh
    R. Sanjeevi
    M. Vadivel
    [J]. Interactions, 245 (1):
  • [8] Studies on Optimizing Process Parameters of Fused Deposition Modelling Technology for ABS
    Vishwas, M.
    Basavaraj, C. K.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2017, 4 (10) : 10994 - 11003
  • [9] Desirability function analysis approach for optimization of fused deposition modelling process parameters
    Tarigonda, Hariprasad
    Lakshmi Kala, Koyyagura
    Gnanaprakash, Peedinti
    Raghurami Reddy, Doddipalli
    Harsha Vardhan Reddy, Konareddy
    [J]. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2023, 114 (10-11) : 940 - 946
  • [10] Taguchi based process optimization for dimension and tolerance control for fused deposition modelling
    Mahmood, Shahrain
    Qureshi, A. J.
    Talamona, Didier
    [J]. ADDITIVE MANUFACTURING, 2018, 21 : 183 - 190
12345