A Single-Shot, Pixel Encoded 3D Measurement Technique for Structure Light

The Structure Light System (SLS) is a general concept and it is one of the cheapest methods for the non-contact-based 3D reconstruction. The existing single-shot SLS which is primarily based on the spatial encoding techniques are not optimal in terms of resolution and digitally encoded patterns. Those schemes are not flexible, controllable, and designed up to the level of the pixel. So, to increase the resolution and to implement a flexible controllable pattern we proposed a novel heuristic method based on the spatial neighborhood. In this paper, we propose a multi-resolution SLS which can be implemented with a set of 25 geometrical shaped distinct symbols or alphabets to use in the projection pattern as shape primitive. The size of each symbol is well defined in pixels which enabled us to have access and control up to the full resolution of the projector. The shape descriptive parameters for each symbol or alphabet are also defined and computed. To spread the alphabets in a controllable manner, a method is defined to generate a robust pseudo-random sequence of any required size with a certain number of alphanumeric bases, to be employed in the projection pattern concerning the measured resolution. This arrangement will enable us to design the projection patterns according to the required surface area and the resolution. A new technique is developed for the decoding of the captured image pattern. The decoding process depends upon the classification of symbols which is based on shape descriptive parameters. The searching in the neighborhood of a symbol is carried out through computing the location information, grid distance, and direction information to find the codewords which are used to establish the correspondence.