Rolling of AZ31 magnesium alloy strip using induction heating rolls

被引：3
|
作者：
Cai, Ban [1 ]
Li, Changsheng [1 ]
Zhang, Jian [1 ]
Song, Yanlei [1 ]
Zheng, Jianjun [1 ]
机构：
[1] Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110819, Peoples R China
来源：
11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014 | 2014年 / 81卷
关键词：
Finite element simulation; AZ31; alloy; Hot-roller warm rolling process; Temperature field;
D O I：
10.1016/j.proeng.2014.09.152
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Magnesium alloy strips are difficult to produce through cold forming process due to their poor deformation ability. In this article, fabrication of AZ31 alloy strip by Hot-roller warm rolling process was studied. Experiment using induction heating rolls was carried out, its results confirmed that this technique can improve plasticity of AZ31, and reduce its processing difficulty. The temperature change in deformation zone during Hot-roller warm rolling with a roll temperature of 150 similar to 350 degrees C was analyzed by numerical simulation. Finally, a prediction equation of deformation temperature in strips during Hot-roller warm rolling process was established. (C) 2014 Published by Elsevier Ltd.
引用
收藏
页码：209 / 214
页数：6
相关论文
共 50 条
  • [1] Rolling of AZ31 magnesium alloy thin strip dghdsg
    Jiang, Bin
    Wang, Jian
    Ding, Peidao
    Yang, Chunmei
    Pan, Fusheng
    2006 BIMW: 2006 BEIJING INTERNATIONAL MATERIALS WEEK, PTS 1-4: MAGNESIUM, 2007, 546-549 : 365 - +
  • [2] Direct strip casting and hot rolling of an AZ31 magnesium alloy
    Zi, Aikaterini
    Palkowski, Heinz
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 528 (02): : 559 - 565
  • [3] Microstructure evolution during hot rolling of magnesium alloy AZ31 strip
    Shehata, M. T.
    Galvani, C.
    Javaid, A.
    Essadiqi, E.
    Carter, J.
    Verma, R.
    MAGNESIUM TECHNOLOGY 2006, PROCEEDINGS, 2006, : 225 - +
  • [4] Grain refining of magnesium alloy AZ31 by rolling
    Chang, TC
    Wang, JY
    O, CM
    Lee, S
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 140 : 588 - 591
  • [5] Research of electroplastic rolling of AZ31 Mg alloy strip
    Xu, Zhuohui
    Tang, Guoyi
    Tian, Shaoquan
    Ding, Fei
    Tian, Haoyang
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 182 (1-3) : 128 - 133
  • [6] Rolling texture evolution of AZ31 magnesium alloy sheets by isothermal: Eccentric-rolls drawing
    Kohzu, Masahide
    Nakatsuka, Shota
    Higasht, Kenji
    Keikinzoku/Journal of Japan Institute of Light Metals, 2009, 59 (09): : 498 - 501
  • [7] Rolling Texture Evolution of AZ31 Magnesium Alloy Sheets by Isothermal Eccentric-Rolls Drawing
    Kohzu, Masahide
    Nakatsuka, Shota
    Higashi, Kenji
    MATERIALS TRANSACTIONS, 2008, 49 (09) : 2096 - 2099
  • [8] Simulation of rolling process of AZ31 magnesium alloy sheet
    Liu, Di
    Liu, Zuyan
    Wang, Lumeng
    11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 2014, 81 : 173 - 178
  • [9] Effect of rolling deformation on microstructure of AZ31 magnesium alloy
    Chen, Jing-Yi
    Zhang, Bo-Ping
    Tu, Yi-Fan
    Li, Peng-Xi
    Suzuki, Hirowo G.
    AICAM 2005, 2006, 11-12 : 649 - +
  • [10] Recrystallization and Anisotropy of AZ31 Magnesium Alloy by Asynchronous Rolling
    Niu, Wenyong
    Wang, Dongxiao
    Wang, Guiqiao
    Li, Jianping
    METALS, 2023, 13 (09)
12345