A Study of Relation between Tool Wear and Dynamic Cutting Force Ratio in CNC Turning

被引：1
|
作者：
Chaiyawong, Phathara [1 ]
Tangjitsitcharoen, Somkiat [1 ]
机构：
[1] Chulalongkorn Univ, Dept Ind Engn, Fac Engn, Payathai Rd, Bangkok 10330, Thailand
来源：
2018 2ND INTERNATIONAL CONFERENCE ON ADVANCED TECHNOLOGIES IN MANUFACTURING AND MATERIALS ENGINEERING (ATMME 2018) | 2018年 / 389卷
关键词：
D O I：
10.1088/1757-899X/389/1/012008
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Since tool wear directly affects the manufacturing cost in CNC turning process, the aim of this research is to study the effects of cutting conditions on tool wear and dynamic cutting force ratio. It also describes relation of tool wear and dynamic cutting force ratio. The results of experiment show that cutting speed is the most significantly influential factor followed by feed rate, depth of cut and nose radius respectively. In addition, effect of dynamic cutting force on the tool wear analysis show that trend of the dynamic cutting force is not changed even though the cutting condition is changed. Accordingly, the tool wear can be predicted by using the dynamic cutting force ratio in turning process.
引用
收藏
页数：6
相关论文
共 50 条
  • [1] ON THE CORRELATION BETWEEN DYNAMIC CUTTING FORCE AND TOOL WEAR
    LEE, LC
    LEE, KS
    GAN, CS
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1989, 29 (03): : 295 - 303
  • [2] A study on the relationships between static/dynamic cutting force components and tool wear
    Youn, JW
    Yang, MY
    [J]. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2001, 123 (02): : 196 - 205
  • [3] RELATION BETWEEN CUTTING FORCE AND TOOL FORM IN TURNING OF ALUMINIUM ALLOY
    KARDOS, A
    [J]. PERIODICA POLYTECHNICA-ENGINEERING, 1965, 9 (01): : 59 - &
  • [4] Tool wear measurement in turning using force ratio
    Choudhury, SK
    Kishore, KK
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2000, 40 (06): : 899 - 909
  • [5] Tool Holder Sensor Design for Measuring the Cutting Force in CNC Turning Machines
    Uquillas, Daniel Alberto Reyes
    Yeh, Syh-Shiuh
    [J]. 2015 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS (AIM), 2015, : 1218 - 1223
  • [6] Application of wavelet ratio between acoustic emission and cutting force signal decomposing in intelligent monitoring of cutting tool wear when turning SKD 61
    Tien, Dung Hoang
    Thoa, Pham Thi Thieu
    Duy, Trinh Nguyen
    [J]. INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, 18 (01): : 525 - 539
  • [7] Application of wavelet ratio between acoustic emission and cutting force signal decomposing in intelligent monitoring of cutting tool wear when turning SKD 61
    Dung Hoang Tien
    Pham Thi Thieu Thoa
    Trinh Nguyen Duy
    [J]. International Journal on Interactive Design and Manufacturing (IJIDeM), 2024, 18 : 525 - 539
  • [8] Relationship of Temperature and Cutting Force with Tool Wear and Vibration in Metal Turning
    Lapshin, Victor
    Khristoforova, Veronika
    Nosachev, Sergey
    [J]. OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2020, 22 (03): : 44 - 58
  • [9] Correlation of cutting force features with tool wear in a metal turning operation
    Dimla, DE
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2001, 215 (03) : 435 - 440
  • [10] Investigating Flank Wear and Cutting Force on Hard Steels by CBN Cutting Tool by Turning
    Thamizhmanii, S.
    Hasan, S.
    [J]. WORLD CONGRESS ON ENGINEERING 2008, VOL III, 2008, : 1819 - 1823
12345