Constitutive modeling for ductile metals behavior incorporating strain rate, temperature and damage mechanics

被引:29
|
作者
Bonora, N [1 ]
Milella, PP [1 ]
机构
[1] Univ Cassino, Dept Mech Struct & Environm, DiMSAT, I-03043 Cassino, Italy
关键词
ductile damage; strain rate; solid state equation; impact; dynamic loading;
D O I
10.1016/S0734-743X(01)00063-X
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
One the most serious limitation to an extensive use of computational techniques in simulating and predicting structures and components behavior under dynamic loading is given by the inadequacy of constitutive models to fairly represent failure process. In this paper a new constitutive model for ductile metals has been developed using the innovative solid state equation proposed by Milella (1998) and the non-linear damage model proposed by Bonora (1997). These two models are physically based and require a very limited number of constants that can be experimentally identified according to the procedures given by the authors. The implementation of the model in commercial finite element code is simple and cost effective with respect to similar nucleation and growth (NAG) models with the additional feature that hydrostatic pressure effect on ductile damage is correctly taken into account. (C) 2001 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:53 / 64
页数:12
相关论文
共 50 条
  • [1] EFFECTS OF STRAIN RATE AND TEMPERATURE ON DUCTILE DAMAGE OF METALS
    Sancho, Alexander
    Cox, Mike J.
    Cartwright, Tim
    Hooper, Paul A.
    Dear, John P.
    Davies, Catrin M.
    [J]. PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2018, VOL 6A, 2019,
  • [2] MODELING DUCTILE METALS UNDER LARGE STRAIN, PRESSURE AND HIGH STRAIN RATE INCORPORATING DAMAGE AND MICROSTRUCTURE EVOLUTION
    Iannitti, G.
    Bonora, N.
    Ruggiero, A.
    Dichiaro, S.
    [J]. SHOCK COMPRESSION OF CONDENSED MATTER - 2011, PTS 1 AND 2, 2012, 1426
  • [3] Continuum damage modeling for ductile metals under high strain rate deformation
    Husson, C
    Ahzi, S
    Daridon, L
    Courtin, T
    [J]. JOURNAL DE PHYSIQUE IV, 2003, 110 : 63 - 68
  • [4] A rate-dependent damage mechanics model for predicting plasticity and ductile fracture behavior of sheet metals at high strain rates
    Zeng, Chongyang
    Fang, Xiangfan
    Habibi, Niloufar
    Muenstermann, Sebastian
    Lian, Junhe
    [J]. ENGINEERING FRACTURE MECHANICS, 2024, 306
  • [5] Modeling the strain rate-dependent constitutive behavior in nanotwinned polycrystalline metals
    Guo, Zizheng
    Wu, Kai
    Ruan, Haihui
    Zhu, Linli
    [J]. PHYSICS LETTERS A, 2020, 384 (10)
  • [6] A plastic constitutive equation incorporating strain, strain-rate, and temperature
    Sung, Ji Hyun
    Kim, Ji Noon
    Wagoner, R. H.
    [J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2010, 26 (12) : 1746 - 1771
  • [7] A dislocation-based constitutive description for modeling the behavior of FCC metals within wide ranges of strain rate and temperature
    Rodriguez-Martinez, J. A.
    Rodriguez-Millan, M.
    Rusinek, A.
    Arias, A.
    [J]. MECHANICS OF MATERIALS, 2011, 43 (12) : 901 - 912
  • [8] Inelastic Behavior of Polyoxymethylene for Wide Strain Rate and Temperature Ranges: Constitutive Modeling and Identification †
    Filanova, Yevgeniya
    Hauptmann, Johannes
    Laengler, Frank
    Naumenko, Konstantin
    [J]. MATERIALS, 2021, 14 (13)
  • [9] Constitutive Modelling of Ductile Metals at High Temperature
    Woelke, Pawel
    Anderson, Ryan
    Hiriyur, Badri
    Abboud, Najib
    [J]. STRUCTURES IN FIRE, 2016, : 604 - 607
  • [10] Integration of Temperature, Stress State, and Strain Rate for the Ductility of Ductile Metals
    Qiu, Hai
    [J]. MATERIALS TRANSACTIONS, 2013, 54 (04) : 626 - 629