The Influence of the Grinding Force to the Material Removal Rate in the Heavy Load Honing

被引：0
|
作者：
Guo, Jianye [1 ]
Yu, Chao [1 ]
Cai, Guangqi [2 ]
机构：
[1] Shenyang Aerosp Univ, Sch Mech & Elect Engn, Shenyang, Peoples R China
[2] Northeastern Univ, Sch Mech Engn & Automat, Shenyang, Peoples R China
来源：
ADVANCED RESEARCH ON MECHANICAL ENGINEERING, INDUSTRY AND MANUFACTURING ENGINEERING, PTS 1 AND 2 | 2011年 / 63-64卷
关键词：
heavy load honing; mathematical model; grinding force; material removal rate; honing pressure;
D O I：
10.4028/www.scientific.net/AMM.63-64.719
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper took the grinding force in the heavy load honing as the object to research, it mainly analyzed the influence of the grinding force to the material removal rate. First the mathematical model of grinding force was established from starting with the honing pressure. Then the mathematical model of material removal rate was established according to the relationship between material removal volume and honing pressure. Finally the influence of the honing pressure to the material removal rate was analyzed with the aid of software. The results of this paper have important theoretical significance to optimize the processing technology of heavy load honing and further enhance the machining precision and the honing efficiency.
引用
收藏
页码：719 / +
页数：2
相关论文
共 50 条
  • [1] Influence of granularity of grinding stone on grinding force and material removal in the rail grinding process
    Wang, Wen-jian
    Gu, Kai-kai
    Zhou, Kun
    Cai, Zhen-bing
    Guo, Jun
    Liu, Qi-yue
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2019, 233 (02) : 355 - 365
  • [2] Modelling of surface finish and material removal rate in rough honing
    Buj-Corral, Irene
    Vivancos-Calvet, Joan
    Coba-Salcedo, Milton
    [J]. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2014, 38 (01): : 100 - 108
  • [3] The Effect of Honing Speed and Grain Size on Surface Roughness and Material Removal Rate during Honing
    Vrac, Damir
    Sidjanin, Leposava
    Balos, Sebastian
    [J]. ACTA POLYTECHNICA HUNGARICA, 2014, 11 (10) : 163 - 175
  • [4] Model of ELID Grinding Material Removal Rate
    Kuai, Ji-Cai
    [J]. PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND APPLICATIONS (ICMSA 2015), 2015, 3 : 828 - 832
  • [5] Specific material removal rate of generating grinding of gears - A new model for the specific material removal rate of generating grinding of gears
    Bezogenes Zeitspanvolumen beim kontinuierlichen Wälzschleifen von Verzahnungen: Ein neues Modell
    [J]. 1600, VDI Fachmedien GmBH & Co. KG (104):
  • [6] Analysis of material removal rate in magnetic assisted abrasive honing process
    Chohan, Jasgurpreet Singh
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 37 : 3516 - 3519
  • [7] Modeling material removal rate of heavy belt-grinding in manufacturing of U71Mn material
    Wang R.
    Li J.
    Liu Y.
    Wang W.
    [J]. Liu, Yueming (liuym@bjtu.edu.cn), 1600, Trans Tech Publications Ltd (693): : 1082 - 1089
  • [8] A novel material removal rate model based on single grain force for robotic belt grinding
    Li, Lufeng
    Ren, Xukai
    Feng, Hengjian
    Chen, Huabin
    Chen, Xiaoqi
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2021, 68 : 1 - 12
  • [9] Grinding force model for gear profile grinding based on material removal mechanism
    Yuliang Xiao
    Shilong Wang
    Chi Ma
    Sibao Wang
    [J]. The International Journal of Advanced Manufacturing Technology, 2023, 125 : 743 - 762
  • [10] Grinding force model for gear profile grinding based on material removal mechanism
    Xiao, Yuliang
    Wang, Shilong
    Ma, Chi
    Wang, Sibao
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 125 (1-2): : 743 - 762
12345