Development of a twin screw injection molding extruder

被引：0

作者：

Bigio, D ^{[1
]}

Mudalamane, R ^{[1
]}

Tomayko, D ^{[1
]}

Zerafati, S ^{[1
]}

机构：

[1] Univ Maryland, College Pk, MD 20742 USA

来源：

ANTEC '99: PLASTICS BRIDGING THE MILLENNIA, CONFERENCE PROCEEDINGS, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPECIAL AREAS; | 1999年

关键词：

D O I：

暂无

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

This paper documents the development of a novel injection molding machine, the Twin-screw Injection Molding Extruder (TIME). A reduction of capital equipment and thermal degradation is achieved by combining the compounding ability of a Twin Screw Extruder (TSE) with the final part fabrication techniques of an injection molding machine. Tests conducted on a bench-scale model of the machine have shown that an entirely new set of process parameters comes into prominence due to the combination of compounding and injection molding processes. The main control objectives also differ from a traditional injection molding process.

引用

页码：754 / 758

页数：5

共 50 条

[1] Development of a twin screw injection molding extruder (TIME)
Bigio, D
Wang, M
Knoeller, D
Mudalamane, R
Tomayko, D
Zerafati, S
POLYOLEFINS XI: THE INTERNATIONAL CONFERENCE ON POLYOLEFINS, 1999, : 769 - 781
[2] Processing glass-filled polyethylene on a twin-screw injection molding extruder
Bigio, D
Mudalamane, R
Huang, Y
Zerafati, S
Atochem, E
ANTEC 2000: SOCIETY OF PLASTICS ENGINEERS TECHNICAL PAPERS, CONFERENCE PROCEEDINGS, VOLS I-III, 2000, : 590 - 594
[3] TWIN-SCREW EXTRUDER DEVELOPMENT FOR THE ITER PELLET INJECTION SYSTEM
Meitner, S. J.
Baylor, L. R.
Combs, S. K.
Fehling, D. T.
McGill, J. M.
Rasmussen, D. A.
Leachman, J. W.
2009 23RD IEEE/NPSS SYMPOSIUM ON FUSION ENGINEERING, 2009, : 493 - +
[4] INJECTION-MOLDING OF SOY PROTEIN - HIGH MOISTURE EXTRUSION WITH TWIN SCREW EXTRUDER .2.
ISOBE, S
NOGUCHI, A
JOURNAL OF THE JAPANESE SOCIETY FOR FOOD SCIENCE AND TECHNOLOGY-NIPPON SHOKUHIN KAGAKU KOGAKU KAISHI, 1988, 35 (07): : 471 - 479
[5] SINGLE SCREW EXTRUDER OR TWIN-SCREW EXTRUDER
HANSMANN, J
GUMMI ASBEST KUNSTSTOFFE, 1978, 31 (09): : 632 - &
[6] DEVELOPMENT OF A TWIN-SCREW D2 EXTRUDER FOR THE ITER PELLET INJECTION SYSTEM
Meitner, S. J.
Baylor, L. R.
Carbajo, J. J.
Combs, S. K.
Fehling, D. T.
Foust, C. R.
McFee, M. T.
McGill, J. M.
Rasmussen, D. A.
Sitterson, R. G.
Sparks, D. W.
Qualls, A. L.
FUSION SCIENCE AND TECHNOLOGY, 2009, 56 (01) : 52 - 56
[7] Melt temperature variations in the barrels of an injection moulder and a twin screw extruder
Sombatsompop, N
Chaiwattanpipat, W
Panapoy, M
MATERIALS RESEARCH INNOVATIONS, 2000, 3 (05) : 271 - 275
[8] Analysis of morphology development of immiscible blends in a twin screw extruder
Franzheim, O
Stephan, M
Rische, T
Heidemeyer, P
Burkhardt, U
Kiani, A
ADVANCES IN POLYMER TECHNOLOGY, 1997, 16 (01) : 1 - 10
[9] Nylon 66/Clay Nanocomposite Structure Development in a Twin Screw Extruder
Lin, Bin
Thuemen, Anne
Heim, Hans-Peter
Scheel, Gerhard
Sundararaj, Uttandaraman
POLYMER ENGINEERING AND SCIENCE, 2009, 49 (04): : 824 - 834
[10] Development of laminar morphology in a co-rotating twin screw extruder
Department of Chemical Engineering, McGill University, M.H. Wong Building, 3610 University Street, Montreal, Que. H3A 2B2, Canada
Adv Polym Technol, 2 (89-108):

← 1 2 3 4 5 →