Investigation of Tool Deflection of Solid Carbide End Mill in Cutting Process

被引：0

作者：

Wu, Qiong ^{[1
]}

Zhang, Yidu ^{[1
]}

Gao, Xiangsheng ^{[1
]}

Fang, Lin ^{[2
]}

机构：

[1] Beihang Univ, Sch Mech Engn & Automat, State Key Lab Virtual Real Technol & Syst, Beijing 100191, Peoples R China

[2] Army Aviat Inst, Sch Mech Engn, Beijing 101123, Peoples R China

来源：

HISTORY OF MECHANICAL TECHNOLOGY AND MECHANICAL DESIGN 2012 | 2012年 / 163卷

关键词：

Deflection; FEM; Cantilever Beam; Mill; FORM ERROR; PREDICTION;

D O I：

10.4028/www.scientific.net/AMM.163.95

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Tool deflection is one of the important influencing factors for surface roughness and surface integrity of work piece in cutting process. The excessive deflection even causes seriously defects of work piece or failures of tool. This paper gives theory analysis and mathematic method to predict the tool deflection by means of the cantilever beam deflection theory. Based on modeling of 3-dimmsion milling force model, the finite element analysis has been performed for calculation of tool deflection. The experiment of tool deflection of solid end mill is performed to compare simulation and theory. Results show the correction and reliability of research method. It lays a foundation for fast calculation of tool deflection and optimization of milling parameters.

引用

页码：95 / +

页数：2

共 50 条

[1] 3D modeling and experimental investigation for tool deflection in end mill cutting of AISI 1045
Thakur, Ankit
Singh, Gurmeet
Minhas, Navdeep
Sharma, Varun
Bansal, Anuj
[J]. MATERIALS TODAY-PROCEEDINGS, 2021, 42 : 876 - 883
[2] Tool Concept for a Solid Carbide End Mill for Roughing and Finishing of the Tool Steel Toolox 44
Globisch, Steffen
Friedrich, Markus
Heidemann, Nils
Doepper, Frank
[J]. JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2024, 8 (04):
[3] Cutting process of glass with end mill
Matsumura, Takashi
Ono, Takenori
[J]. International Journal of Machining and Machinability of Materials, 2009, 6 (1-2) : 139 - 158
[4] A Methodology for 2D Cutting Process Simulation of Solid End Mill
Skrypka, Kateryna
Pittala, Gaetano
[J]. PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017), 2017, 1896
[5] Influence of the cutting edge microgeometry on the tool life in austenitic stainless steel machining with carbide end mill
Bozga, Marius-Bogdan
Popa, Marcel Sabin
Sattel, Stefan
Tomoiaga, Vlad-Bogdan
[J]. 21ST INNOVATIVE MANUFACTURING ENGINEERING & ENERGY INTERNATIONAL CONFERENCE - IMANE&E 2017, 2017, 112
[6] Analysis of cutting process with roughing end mill
Takashi Matsumura
Takahiro Shirakashi
Eiji Usui
[J]. International Journal of Material Forming, 2009, 2 : 555 - 558
[7] Analysis of Cutting Process with Roughing End Mill
Matsumura, Takashi
Shirakashi, Takahiro
Usui, Eiji
[J]. INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2009, 2 : 555 - 558
[8] Root Cause of End Mill Cutting Tool Failure
Waloyo, Yohanes
Triyono, Triyono
Tjahjana, Dominicus D. D. P.
[J]. 4TH INTERNATIONAL CONFERENCE ON INDUSTRIAL, MECHANICAL, ELECTRICAL, AND CHEMICAL ENGINEERING, 2019, 2097
[9] Wear of Solid Carbide Ball Nose End Mill
Lapunka, Iwona
Wittbrodt, Piotr
Marek-Kolodziej, Katarzyna
[J]. ADVANCES IN MANUFACTURING (MANUFACTURING 2017), 2018, : 951 - 961
[10] Prediction of flexible cutting forces and tool deflections for general micro end mill considering tool run-out and deflection feedback
Zhou, Lin
Yang, Cencen
Peng, Fangyu
Yan, Rong
Deng, Ben
Liu, Ming
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (1-4): : 1415 - 1428

← 1 2 3 4 5 →