A Study of Springback of Sheet Metal Formed Parts Using ANSYS

被引：1

作者：

Wang, Xuan Zhi ^{[1
]}

Masood, S. H. ^{[1
]}

Ng, Daron ^{[1
]}

Dawwas, Omar ^{[1
]}

机构：

[1] Swinburne Univ Technol, Fac Engn & Ind Sci, Melbourne, Vic 3122, Australia

来源：

MATERIALS PROCESSING TECHNOLOGY, PTS 1-4 | 2011年 / 291-294卷

关键词：

AHSS; ANSYS; finite element analysis; sheet metal stamping; springback prediction;

D O I：

10.4028/www.scientific.net/AMR.291-294.381

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Springback is one of main reason for inaccuracy of sheet metal formed product. Therefore prediction of springback is very important for production of precise products. Springback is an elastic material recovery after unloading of the forming tools, and causes variations and inconsistencies of final part dimensions. This is affected by various parameters involved in the process of sheet metal forming. The main aim of this paper is to investigate the springback of finished part by analysing and controlling the effects of the control parameters on the springback of advanced high strength steels (AHSS). This is done by modelling a deep-drawing process and analysing the results as determined on ANSYS finite element analysis software.

引用

页码：381 / 384

页数：4

共 50 条

[1] Study regarding the springback of metal sheet parts after bending
Purcarea, Mihail
Dumitrescu, Andrei
21ST INNOVATIVE MANUFACTURING ENGINEERING & ENERGY INTERNATIONAL CONFERENCE - IMANE&E 2017, 2017, 112
[2] ELASTIC SPRINGBACK AND RESIDUAL STRESSES IN SHEET METAL FORMED BY BENDING
QUEENER, CA
DEANGELIS, RJ
ASM TRANSACTIONS QUARTERLY, 1968, 61 (04): : 757 - +
[3] An experimental study on the springback in bending of w-shaped micro sheet-metal parts
Wan-Nawang, Wan-Adlan
Qin, Yi
Liu, Xiaoyu
4TH INTERNATIONAL CONFERENCE ON NEW FORMING TECHNOLOGY (ICNFT 2015), 2015, 21
[4] A study on the springback in the sheet metal flange drawing
Lee, Sang-Wook
Kim, Yoon-Tae
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 187 : 89 - 93
[5] Formed developables - a new class of sheet metal parts
Bhuva, J.
Weiss, M.
Rolfe, B.
Jiao, J.
Paulino, M.
42ND CONFERENCE OF THE INTERNATIONAL DEEP DRAWING RESEARCH GROUP, 2023, 1284
[6] STRAIN ANALYSIS OF FORMED SHEET-METAL PARTS
NEWBY, JR
METALS ENGINEERING QUARTERLY, 1975, 15 (02): : 10 - 17
[7] Study Of Effect Of Load On Springback In Sheet Metal Bending
Panthi, S. K.
Ramakrishnan, N.
Das Gupta, R.
Chouhan, J. S.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2008, 61 (01) : 39 - 43
[8] Study of effect of load on springback in sheet metal bending
S. K. Panthi
N. Ramakrishnan
R. Das Gupta
J. S. Chouhan
Transactions of the Indian Institute of Metals, 2008, 61 : 39 - 43
[9] Springback Prediction for Complex Sheet Metal Forming Parts Based on Genetic Neural Network
Ruan, Feng
Feng, Yang
Liu, Wenjuan
2008 INTERNATIONAL SYMPOSIUM ON INTELLIGENT INFORMATION TECHNOLOGY APPLICATION, VOL I, PROCEEDINGS, 2008, : 157 - 161
[10] Springback Control and Compensation of Incremental Forming for Sheet Metal Parts with Open Geometric Feature
Li M.
Dai P.
Chang Z.
Chen J.
Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2020, 31 (22): : 2723 - 2727

← 1 2 3 4 5 →