Fabrication of Poly(methyl methacrylate) (PMMA) Microfluidic Chips Using CO2 Laser Beam Machining and Hot Bonding

被引：0
|
作者：
Huang, Yishi [1 ]
Wang, Shouxin [2 ]
Tian, Zhuang [1 ]
Mu, Yingzi [1 ]
Hou, Chunming [1 ]
Chen, Xueye [2 ]
机构：
[1] Shenyang Inst Technol, Sch Mech Engn & Automat, Fushun 113122, Liaoning, Peoples R China
[2] Liaoning Univ Technol, Fac Mech Engn & Automat, Jinzhou 121001, Liaoning, Peoples R China
来源：
LASERS IN ENGINEERING | 2020年 / 47卷 / 4-6期
关键词：
CO2; laser; poly(methyl methacrylate) (PMMA); microfluidic chip; laser machining; hot bonding; focal distance; processing quality; LASER-ABLATION;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A single, versatile fabrication method for producing microfluidic chips on poly(methyl methacrylate) (PMMA) substrates is described. First, we processed the microchannel using CO2 laser beam machining on the PMMA substrate. In this course the influence of laser power, scanning speed and focal distance on the processing quality of microchannel were investigated by orthogonal experiment. The experimental result shows that the greatest influence factor is focal distance. Based on the experiment, we found a set of optimal parameters to process the microchannel within the set parameters. Next, the substrate with the microchannels and the cover are combined using thermal bonding. Since the previous bonding technology has a low success rate, we have proposed a new bonding termed a pre-bonding technique for bonding chips. The principle of this technology is to first remove the material stress with low pressure, and then use high pressure bonding. Finally, the processing quality of the microchannel and the feasibility of the pre-bonding method were verified successfully by the mixed experiment. This study can help people pay attention to the effect of focal distance on the shape of microchannels when using CO2 laser beam machining to process microchannels.
引用
收藏
页码：249 / 259
页数：11
相关论文
共 50 条
  • [1] Fabrication of poly(methyl methacrylate) (pmma) microfluidic chips using co2 laser beam machining and hot bonding
    Huang, Yishi
    Wang, Shouxin
    Tian, Zhuang
    Mu, Yingzi
    Hou, Chunming
    Chen, Xueye
    Chen, Xueye (xueye_chen@126.com), 1600, Old City Publishing (47): : 249 - 259
  • [2] Fabrication of poly(methyl methacrylate) (PMMA) microfluidic chips by a simple hot embossing method
    Du, XG
    Guan, YX
    Wang, FR
    Fang, ZL
    CHEMICAL JOURNAL OF CHINESE UNIVERSITIES-CHINESE, 2003, 24 (11): : 1962 - 1966
  • [3] Fabrication of Poly(methyl methacrylate) (PMMA) Microfluidic Chip with Cantor Fractal Structure Using a CO2 Laser System
    Wu, Z.
    Chen, X.
    Zheng, Y.
    Wang, T.
    LASERS IN ENGINEERING, 2019, 43 (1-3) : 121 - 129
  • [4] The Fabrication of Poly(methyl methacrylate) (PMMA) Microfluidic Chips by Laser Patterning and Electrohydrodynamic (EHD) Printing
    Yang, X.
    Yin, Z-F
    Li, L.
    Zou, H-L
    LASERS IN ENGINEERING, 2020, 47 (1-3) : 183 - 194
  • [5] CO2 laser micromachining for rapid fabrication of a four layer Poly(methyl methacrylate) (PMMA)-based microfluidic diluter
    Chen, X. (xueye_chen@126.com), 2017, Old City Publishing (38) : 1 - 2
  • [6] CO2 Laser Micromachining for Rapid Fabrication of a Four Layer Poly(methyl methacrylate) (PMMA)-based Microfluidic Diluter
    Chen, X.
    Shen, J.
    Zhou, M.
    LASERS IN ENGINEERING, 2017, 38 (1-2) : 57 - 65
  • [7] Assessment of PMMA and polystyrene based microfluidic chips fabricated using CO2 laser machining
    Bilican, Ismail
    Guler, Mustafa Tahsin
    APPLIED SURFACE SCIENCE, 2020, 534
  • [8] A BONDING METHOD BETWEEN POLY(LACTIC ACID) (PLA) AND POLY(METHYL METHACRYLATE) (PMMA) FOR MICROFLUIDIC CHIPS
    Duong, Huyen Lynh
    Chen, Pin Chuan
    2017 19TH INTERNATIONAL CONFERENCE ON SOLID-STATE SENSORS, ACTUATORS AND MICROSYSTEMS (TRANSDUCERS), 2017, : 1273 - 1276
  • [9] CO2 Laser Ablation of Microchannel on PMMA Substrate for Effective Fabrication of Microfluidic Chips
    Chen, X.
    Li, T.
    Shen, J.
    INTERNATIONAL POLYMER PROCESSING, 2016, 31 (02) : 233 - 238
  • [10] CO2 Laser Machining of Microchannels into Poly(methyl methacrylate) (PMMA) Substrates to Fabricate Concentration Gradient Generators
    Mu, Y-Z
    Wang, S-X
    Lv, R-H
    Hou, C-M
    Huang, Y-S
    Tian, Z.
    Jiang, D-W
    Chen, X-Y
    LASERS IN ENGINEERING, 2021, 48 (4-6) : 369 - 378
12345