Investigation of microstructures and fatigue properties of friction stir welded Al-Mg alloy

被引：36
|
作者：
Zhou, Caizhi [1 ]
Yang, Xinqi
Luan, Guohong
机构：
[1] Tianjin Univ, Sch Mat Sci & Engn, Tianjin 300072, Peoples R China
[2] FSW Technol Ltd Co, China FSW Ctr, Beijing 100024, Peoples R China
来源：
MATERIALS CHEMISTRY AND PHYSICS | 2006年 / 98卷 / 2-3期
关键词：
fatigue; friction stir welding; MIG-pulse welding; Al-Mg alloy;
D O I：
10.1016/j.matchemphys.2005.09.019
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
FS welds have a sound joint for the lack of voids, cracks and distortions. When compared to the base material, friction stir welding (FSW) joints exhibit a finer crystal grain in the weld nugget, and advancing side has a clearer boundary with the weld nugget than that of the retreating side. The fatigue life of FS welds is 6-14 times longer than that of MIG-pulse welds under the stress ratio R = 0.1 and the calculated fatigue characteristic values of each weld increase from 42.32 MPa for MIG to 68.47 MPa for FSW at 2 x 10(6) cycles. In the high-cycle regime, the fatigue strength of the FSW joint is almost equivalent to that of the base material. The fatigue fracture of FSW revealed regions of crack initiation, stable crack growth and overload. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码：285 / 290
页数：6
相关论文
共 50 条
  • [1] Impact Toughness of Friction Stir Welded Al-Mg Alloy
    Sedmak, Aleksandar
    Eramah, Abdasalam Mohamed Mahdi
    Tadic, Srdan
    Perkovic, Srda
    Dascau, Horia
    [J]. MATERIALS TESTING, 2014, 56 (10) : 837 - 841
  • [2] IMPACT FRACTURE RESPONSE OF FRICTION STIR WELDED Al-Mg ALLOY
    Eramah, Abdasalam M. M.
    Tadic, Srdan
    Sedmak, Aleksandar
    [J]. STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA, 2013, 13 (03): : 171 - 177
  • [3] Comparative study on fatigue properties of friction stir and MIG-pulse welded joints in 5083 Al-Mg alloy
    Zhou, CZ
    Yang, XQ
    Luan, GH
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2005, 15 (04) : 789 - 794
  • [4] Comparative study on fatigue properties of friction stir and MIG-pulse welded joints in 5083 Al-Mg alloy
    周才智
    杨新岐
    栾国红
    [J]. Transactions of Nonferrous Metals Society of China, 2005, (04) : 789 - 794
  • [5] Low-cycle fatigue of friction stir welded Al-Mg alloys
    Czechowski, A
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 164 : 1001 - 1006
  • [6] Effect of Pin Profile and Process Parameters on the Properties of Friction Stir Welded Al-Mg Alloy
    Chandrashekar, A.
    Ajaykumar, B. S.
    Reddappa, H. N.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (10) : 22283 - 22292
  • [7] Investigation of the microstructure and properties of a friction stir welded Al-Mg-Sc alloy
    Lapasset, G
    Girard, Y
    Campagnac, MH
    Boivin, D
    [J]. THERMEC'2003, PTS 1-5, 2003, 426-4 : 2987 - 2992
  • [8] Fatigue behavior of friction stir welded Al-Mg-Sc alloy
    Besel, Michael
    Sesel, Yasuko
    Mercado, Ulises Alfaro
    Kakiuchi, Toshifumi
    Uematsu, Yoshihiko
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2015, 77 : 1 - +
  • [9] Influences of welding speed on microstructure and mechanical properties of friction stir welded Al-Mg alloy with high Mg content
    Li, Yingli
    Yan, Hongge
    Chen, Jihua
    Xia, Weijun
    Su, Bin
    Ding, Tian
    Li, Xinyu
    [J]. MATERIALS RESEARCH EXPRESS, 2020, 7 (07)
  • [10] Fatigue Performance of Friction-Stir-Welded Al-Mg-Sc Alloy
    Zhemchuzhnikova, Daria
    Mironov, Sergey
    Kaibyshev, Rustam
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (01): : 150 - 158
12345