Study of Crack Initiation of 15-15Ti Austenitic Steel in Liquid PbBi

被引：6
|
作者：
Hojna, Anna [1 ]
Di Gabriele, Fosca [1 ]
Chocholousek, Michal [1 ]
Spirit, Zbynek [1 ]
Rozumova, Lucia [1 ]
机构：
[1] Ctr Vyzkumu Rez Sro, UJV Grp, Rez 130, Husinec 25068, Czech Republic
来源：
JOURNAL OF NUCLEAR ENGINEERING AND RADIATION SCIENCE | 2019年 / 5卷 / 03期
关键词：
heavy liquid metals; generation IV nuclear systems; austenitic stainless steel; environmentally assisted cracking; liquid metal embrittlement; PbBi;
D O I：
10.1115/1.4041564
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
The austenitic steel 15-15Ti is being considered as one of the candidate materials for internal structural components of future heavy liquid metal (HLM) nuclear systems. This work studies the steel compatibility with liquid PbBi. Constant extension rate tensile (CERT) tests of tapered specimens were used to study sensitivity to liquid metal embrittlement (LME) and crack initiation. The taper creates a variation of stress along the gauge length which allows the identification of the stress and strain for the crack appearance. Testing was performed in air and in PbBi with 10(-6) to 10(-12) wt % oxygen content at 300 degrees C. Post-test observation by scanning electron microscopy (SEM) highlighted the crack morphology. An evaluation of the environmental effect on the crack initiation is presented.
引用
收藏
页数：8
相关论文
共 50 条
  • [1] 15-15Ti(Si) austenitic steel: Creep behaviour in hostile environment
    Strafella A.
    Coglitore A.
    Fabbri P.
    Salernitano E.
    1600, Gruppo Italiano Frattura (11): : 352 - 365
  • [2] Creep behaviour of 15-15Ti(Si) austenitic steel in air and in liquid lead at 550°C
    Strafella, A.
    Coglitore, A.
    Salernitano, E.
    XXIV ITALIAN GROUP OF FRACTURE CONFERENCE, 2017, 2017, 3 : 484 - 497
  • [3] Transmission Electron Microscopy Characterization of Grain Structure and Nanoparticles of 15-15Ti ODS Austenitic Steel
    Gong, Aoxiang
    Xu, Chi
    An, Zhan
    Tong, Zhenfeng
    Cailiao Daobao/Materials Reports, 2024, 38 (10):
  • [4] CHARACTERISATION OF CRACK INITIATION AND GROWTH IN AUSTENITIC 1.4970 STEEL IN PbBi
    Rozumova, Lucia
    Hojna, Anna
    Di Gabriele, Fosca
    Chocholousek, Michal
    Spirit, Zbynek
    27TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2018), 2018, : 825 - 830
  • [5] Enhanced corrosion resistance of 15-15Ti austenitic steel in liquid lead-bismuth eutectic at 550 °C by shot peening processing
    Wang, Da
    Liu, Sirui
    Ma, Xianfeng
    Xiao, Changquan
    Gong, Xing
    Zhu, Huiping
    Niu, Fenglei
    CORROSION SCIENCE, 2024, 226
  • [6] Ni segregation in the oxide film of 15-15Ti austenitic steel at high-temperature CO 2
    Qi, Le
    Liu, Chao
    Shen, Tielong
    Jin, Peng
    Yang, Yushan
    Wang, Zhiguang
    CORROSION SCIENCE, 2024, 236
  • [7] Microstructure and corrosion property evolution of a surface-nanostructured 15-15Ti austenitic steel during immersion in liquid LBE at 550 °C
    Wang, Da
    Zhuo, Weiqian
    Liu, Sirui
    Xiao, Changquan
    Zhu, Wenjian
    Sun, Bihan
    Ma, Xianfeng
    Yuan, Ganfeng
    Sun, Yulin
    JOURNAL OF NUCLEAR MATERIALS, 2025, 603
  • [8] Thermal creep properties of Ti-stabilized DIN 1.4970 (15-15Ti) austenitic stainless steel pressurized cladding tubes
    Cautaerts, Niels
    Delville, Remi
    Dietz, Wolfgang
    Verwerft, Marc
    JOURNAL OF NUCLEAR MATERIALS, 2017, 493 : 154 - 167
  • [9] Cavity Swelling of 15-15Ti Steel at High Doses by Ion Irradiation
    Liu, Cong
    Ma, Hailiang
    Fan, Ping
    Li, Ke
    Zhang, Qiaoli
    Du, Aibing
    Feng, Wei
    Su, Xiping
    Zhu, Shengyun
    Yuan, Daqing
    MATERIALS, 2024, 17 (04)
  • [10] Mechanical behavior in liquid lead of Al2O3 coated 15-15Ti steel and an Alumina-Forming Austenitic steel designed to mitigate their corrosion
    Serre, Ingrid Proriol
    Vogt, Jean-Bernard
    ENGINEERING FAILURE ANALYSIS, 2022, 139
12345