Mechanochemical synthesis and rapid sintering of nanocrystalline AlCr2-2Al2O3 composite and its mechanical properties

被引:0
|
作者
Yoon, Jin-Kook [1 ]
Shon, In-Jin [2 ]
机构
[1] Korea Inst Sci & Technol, Mat Architecturing Res Ctr, POB 131, Seoul 130650, South Korea
[2] Chonbuk Natl Univ, Res Ctr Hydrogen Fuel Cell, Div Adv Mat Engn, 664-14 Deokjin Dong L Ga, Jeonju 56756, Jeonbuk, South Korea
来源
基金
新加坡国家研究基金会;
关键词
Sintering; Hardness; Nanocrystalline; Fracture toughness; Synthesis; CONSOLIDATION; INTERMETALLICS; CERAMICS;
D O I
暂无
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Nanopowders of AlCr2 and Al2O3 were synthesized during high energy ball milling. Densely nanostructured AlCr2-2Al(2)O(3) composite was consolidated by high-frequency induction heated sintering within 2 min from milled powders. Highly dense AlCr2-2Al(2)O(3) composite with relative density of up to 96% was produced under application of a 80 MPa pressure and the induced current. The fracture toughness of a AlCr2-Al2O3 composite in this study is similar to that of previous study, while the hardness of a AlCr2-Al2O3 composite in this study is better than that of previous study due to the grain refinement. The fracture toughness of AlCr2-2Al(2)O(3) composite is higher than that of pure Al2O3. The microstructure and mechanical properties were investigated using FE-SEM with EDS and Vickers hardness tester.
引用
收藏
页码:876 / 880
页数:5
相关论文
共 50 条
  • [1] Simultaneous Synthesis and Sintering of a Nanocrystalline AlCr2-Al2O3 Composite by Rapid Heating and Its Mechanical Properties
    Kwak, Bong-Won
    Lee, Seok-Jae
    Shon, In-Jin
    [J]. KOREAN JOURNAL OF METALS AND MATERIALS, 2016, 54 (06): : 409 - 414
  • [2] Mechanochemical Synthesis and Rapid Consolidation of Nanostructured CoTi-Al2O3 Composite by Pulsed Current Activated Sintering and Its Mechanical Properties
    Shon, In-Jin
    Kang, Hyun-Su
    [J]. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2015, 15 (07) : 5330 - 5333
  • [3] Properties and consolidation of nanocrystalline 3Cu-Al2O3 composite by rapid sintering
    Ko, In-Yong
    Kim, Na-Ri
    Lee, Jin-Yeoung
    Park, Na-Ra
    Doh, Jung-Mann
    Shon, In-Jin
    [J]. RESEARCH ON CHEMICAL INTERMEDIATES, 2010, 36 (6-7) : 775 - 784
  • [4] Mechanochemical Synthesis and Rapid Consolidation of Nanocrystalline Al2O3-2.25Co Composite by High-Frequency Induction Heating and Its Mechanical Properties
    Park, Na-Ra
    Shon, In-Jin
    [J]. MATERIALS TRANSACTIONS, 2013, 54 (06) : 1049 - 1052
  • [5] Properties and consolidation of nanocrystalline 3Cu–Al2O3 composite by rapid sintering
    In-Yong Ko
    Na-Ri Kim
    Jin-Yeoung Lee
    Na-Ra Park
    Jung-Mann Doh
    In-Jin Shon
    [J]. Research on Chemical Intermediates, 2010, 36 : 775 - 784
  • [6] Fast consolidation and properties of a nanostructured AlCr2-2Al2O3 composite from mechanochemically synthesized powders by pulsed current activated heating
    Kwak, Bong-Won
    Shon, In-Jin
    [J]. CERAMICS INTERNATIONAL, 2016, 42 (05) : 6487 - 6494
  • [7] Mechanical synthesis and rapid consolidation of a nanocrystalline Cu-Al2O3 composite by high frequency induction heated sintering
    In-Jin Shon
    Jin-Yeoung Lee
    Kee-Seok Nam
    Byung-Moon Moon
    Dong-Mok Lee
    [J]. Electronic Materials Letters, 2009, 5 : 77 - 81
  • [8] Mechanical Synthesis and Rapid Consolidation of a Nanocrystalline Cu-Al2O3 Composite by High Frequency Induction Heated Sintering
    Shon, In-Jin
    Lee, Jin-Yeoung
    Nam, Kee-Seok
    Moon, Byung-Moon
    Lee, Dong-Mok
    [J]. ELECTRONIC MATERIALS LETTERS, 2009, 5 (02) : 77 - 81
  • [9] Mechanochemical Synthesis and Rapid Consolidation of Nanocrystalline 3NiAl-Al2O3 Composites
    Shon, In-Jin
    Ko, In-Yong
    Jo, Seung-Hoon
    Doh, Jung-Mann
    Yoon, Jin-Kook
    Park, Sang-Whan
    [J]. JOURNAL OF NANOMATERIALS, 2011, 2011
  • [10] Simultaneous Synthesis and Sintering of Nanostructured MgAl2O4-Mg3Al2Si3O12 Composite and its Mechanical Properties
    Kang, Hyun Su
    Doh, Jung Mann
    Yoon, Jin Kook
    Shon, In Jin
    [J]. KOREAN JOURNAL OF METALS AND MATERIALS, 2014, 52 (10): : 777 - 782