OPTIMIZATION OF DIFFUSION BONDING PARAMETERS OF DISSIMILAR ALUMINIUM MATRIX COMPOSITES

被引：0

作者：

Sittaramane, Azhagapattar ^{[1
]}

Mahendran, Govindarajan ^{[2
]}

机构：

[1] Sathyabama Inst Sci & Technol, Dept Mech Engn, Chennai, Tamil Nadu, India

[2] IFET Coll Engn, Villupuram, Tamil Nadu, India

来源：

COMPTES RENDUS DE L ACADEMIE BULGARE DES SCIENCES | 2019年 / 72卷 / 04期

关键词：

diffusion bonding; Aluminium Fly Ash; Aluminium Silicon Carbide; Taguchi technique; bonding strength; ANOVA;

D O I：

10.7546/CRABS.2019.04.11

中图分类号：

O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];

学科分类号：

07 ; 0710 ; 09 ;

摘要：

Diffusion bonding (DB) of Aluminium Fly Ash (AFA) and Aluminium Silicon Carbide (ASC) composites are used in this study. Taguchi's L27 orthogonal array has been adopted for experimentation. The process parameters considered in the study were temperature, pressure and time. Optimization was carried out to find the optimal parameters for efficient bonding. Bonding conditions such as temperature, pressure and time are optimized on bonding strength. The optimal parameter combination for obtaining high bonding strength yields is T2P2HT1 with 475 degrees C of temperature, 12 MPa of pressure and 60 min of time. The response table shows that temperature is a dominant factor, followed by time and pressure. Analysis of variance (ANOVA) was used to examine the adequacy of developed model.

引用

页码：510 / 515

页数：6

共 50 条

[1] Effects of process parameters on properties of aluminium/stainless steel fibre metal matrix composites made by diffusion bonding
Mater Sci Technol, 12 (982):
[2] Effects of process parameters on properties of aluminium stainless steel fibre metal matrix composites made by diffusion bonding
Hwang, YH
Horng, CF
Lin, SJ
Liu, KS
Jahn, MT
MATERIALS SCIENCE AND TECHNOLOGY, 1997, 13 (12) : 982 - 988
[3] Transient liquid phase bonding of dissimilar materials of aluminium metal matrix composites/low carbon steel
Zhang, Guifeng
Zhang, Jianxun
Zhong, Mingbo
Pei, Yi
Hanjie Xuebao/Transactions of the China Welding Institution, 2007, 28 (09): : 59 - 62
[4] Optimization of machining parameters in drilling hybrid aluminium metal matrix composites
Rajmohan, T.
Palanikumar, K.
Kathirvel, M.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (06) : 1286 - 1297
[5] Arc Brazing of Aluminium, Aluminium Matrix Composites and Stainless Steel in Dissimilar Joints
Grund, Thomas
Gester, Andreas
Wagner, Guntram
Habisch, Stefan
Mayr, Peter
METALS, 2018, 8 (03)
[6] Development of processing windows for diffusion bonding of aluminium/magnesium dissimilar materials
Balasubramanian, V.
Fernandus, M. Joseph
Senthilkumar, T.
WELDING IN THE WORLD, 2013, 57 (04) : 523 - 539
[7] Development of processing windows for diffusion bonding of aluminium/magnesium dissimilar materials
V. Balasubramanian
M. Joseph Fernandus
T. Senthilkumar
Welding in the World, 2013, 57 : 523 - 539
[8] Experimental investigation and optimization of process parameters in EDM of aluminium metal matrix composites
Palanisamy, D.
Devaraju, A.
Manikandan, N.
Balasubramanian, K.
Arulkirubakaran, D.
MATERIALS TODAY-PROCEEDINGS, 2020, 22 : 525 - 530
[9] New approaches for transient liquid phase diffusion bonding of aluminium based metal matrix composites
Shirzadi, AA
Wallach, ER
MATERIALS SCIENCE AND TECHNOLOGY, 1997, 13 (02) : 135 - 142
[10] PROCESS PARAMETERS OPTIMIZATION ON LAP SHEAR STRENGTH IN DIFFUSION BONDING OF ALUMINIUM - FLY ASH (AFA) AND ALUMINIUM - SILICON CARBIDE (ASC) COMPOSITES USING TAGUCHI METHOD
Sittaramane, A.
Mahendran, G.
JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, 2016, 22 (03): : 2905 - 2913

← 1 2 3 4 5 →