Simulation of 3D interlock composite preforming

被引：89
|
作者：
De Luycker, E. [1 ]
Morestin, F. [1 ]
Boisse, P. [1 ]
Marsal, D.
机构：
[1] Univ Lyon, INSA Lyon, LaMCoS, CNRS,UMR 5259, F-69621 Villeurbanne, France
来源：
COMPOSITE STRUCTURES | 2009年 / 88卷 / 04期
关键词：
Fabrics; Textiles; Finite element analysis; Forming; Preform; Interlock Fabrics; PLAIN-WEAVE FABRICS; PICTURE-FRAME TEST; BIAS-EXTENSION; MODEL; BEHAVIOR; INTEGRATION;
D O I：
10.1016/j.compstruct.2008.06.005
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
The ply to ply interlock fabric preform enables to manufacture, by R.T.M. process, thick composite parts that are resistant to delamination and cracking. Numerical simulation of interlock reinforcement forming allows to determine conditions for feasibility of the process and above all to know the position of fibres in the final composite part. For this forming simulation, specific hexahedral finite elements made of segment yarns are proposed. Position of each yarn segment within the element is taken into account. This avoids determination of a homogenized equivalent continuous law that would be very difficult considering the complexity of the weaving. Transverse properties of fabric are taken into account within a hypoelastic constitutive law. A set of 3D interlock fabric forming simulations shows the efficiency of the proposed approach. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码：615 / 623
页数：9
相关论文
共 50 条
  • [1] 3D interlock composite preforming simulation
    Orliac, J. G.
    Charmetant, A.
    Morestin, F.
    Boisse, P.
    Otin, S.
    [J]. MATERIAL FORMING - ESAFORM 2012, PTS 1 & 2, 2012, 504-506 : 261 - +
  • [2] Numerical Analysis of 3D Interlock Composite Preforming
    E. De Luycker
    F. Morestin
    P. Boisse
    D. Marsal
    [J]. International Journal of Material Forming, 2008, 1 : 843 - 846
  • [3] Numerical Analysis of 3D Interlock Composite Preforming
    De Luycker, E.
    Morestin, F.
    Boisse, P.
    Marsal, D.
    [J]. INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2008, 1 (Suppl 1) : 843 - 846
  • [4] EXPERIMENTAL AND NUMERICAL ANALYSES OF 3D INTERLOCK COMPOSITE PREFORMING
    De Luycker, E.
    Orliac, J. G.
    Morestin, F.
    Boisse, P.
    Marsal, D.
    Otin, S.
    [J]. INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2010, 3 : 719 - 722
  • [5] Experimental and Numerical Analyses of 3D Interlock Composite Preforming
    E. De Luycker
    J. G. Orliac
    F. Morestin
    P. Boisse
    D. Marsal
    S. Otin
    [J]. International Journal of Material Forming, 2010, 3 : 719 - 722
  • [6] 3D textile composite reinforcement preforming simulations
    de Luycker, Emmanuel
    Boisse, Philippe
    Morestin, Fabrice
    Marsal, David
    Otin, Stephane
    [J]. MECANIQUE & INDUSTRIES, 2010, 11 (3-4): : 197 - 202
  • [7] Modelling and simulation of 3D orthogonal and interlock fabrics for structural composite applications
    Dash, Ashwini Kumar
    Behera, Bijoya Kumar
    [J]. Indian Journal of Fibre and Textile Research, 2019, 44 (03): : 338 - 343
  • [8] Modelling and simulation of 3D orthogonal and interlock fabrics for structural composite applications
    Dash, Ashwini Kumar
    Behera, Bijoya Kumar
    [J]. INDIAN JOURNAL OF FIBRE & TEXTILE RESEARCH, 2019, 44 (03) : 338 - 343
  • [9] Stabilising and Trimming 3D Woven Fabrics for Composite Preforming Applications
    Snape, Alice E.
    Turner, Jody L.
    El-Dessouky, Hassan M.
    Saleh, Mohamed N.
    Tew, Hannah
    Scaife, Richard J.
    [J]. APPLIED COMPOSITE MATERIALS, 2018, 25 (04) : 735 - 746
  • [10] Stabilising and Trimming 3D Woven Fabrics for Composite Preforming Applications
    Alice E. Snape
    Jody L. Turner
    Hassan M. El-Dessouky
    Mohamed N. Saleh
    Hannah Tew
    Richard J. Scaife
    [J]. Applied Composite Materials, 2018, 25 : 735 - 746
12345