Periodic patterning using aerial image modulation with optical lithography

Photolithography for patterns with periodicity in the illumination plane (2.5-D lithography) has seen rapid advances over the past decade, with the introduction of holographic lithography and the further development of phase-contrast and grayscale photolithography methods. However, each of these techniques suffers from substantial difficulties preventing further integration into device fabrication: a lack of parallel processing capabilities and dimension limitations. Here, we present a demonstration of controlled layer topography through modulation of both the exposure dose and exposure focal plane yielding reproducible 2.5-D patterns which are applied to the further development of plasmonic gratings. This process is entirely compatible with commercially available i-line photolithography and etch hardware, enabling a path to ready integration. (C) The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.