EFFECT OF SOLVENTS ON CURING PROCESS OF PHOTOPOLYMERIZABLE CERAMIC SUSPENSIONS

被引:7
|
作者
Falkowski, P. [1 ]
Grzelak, A. [1 ]
机构
[1] Warsaw Univ Technol, Fac Chem, PL-00664 Warsaw, Poland
关键词
water-thinnable polyester resin; alumina; UV curing; photopolymerization; STEREOLITHOGRAPHY; DISPERSIONS;
D O I
10.2478/amm-2013-0185
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The effect of solvent on rheological properties and way of preparation of ceramic suspensions or dispersions was presented. The research showed that in case of applied polyester resin the water cannot be used in preparation of UV curable suspensions. However, the highly loaded ceramic dispersion in UV curable media can be prepared if the water is replaced by PEG. Thus, the dispersions with good homogeneity and solids content up to 45-50vol.% of alumina can be obtained. The dispersion prepared in this way can be tape casted and UV cured.
引用
收藏
页码:1411 / 1414
页数:4
相关论文
共 50 条
  • [1] Depth and width of cured lines in photopolymerizable ceramic suspensions
    Gentry, Susan P.
    Halloran, John W.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2013, 33 (10) : 1981 - 1988
  • [2] Differential photo-calorimetry of photopolymerizable ceramic suspensions
    Brady, GA
    Halloran, JW
    JOURNAL OF MATERIALS SCIENCE, 1998, 33 (18) : 4551 - 4560
  • [3] Differential photo-calorimetry of photopolymerizable ceramic suspensions
    G. A. Brady
    J. W. Halloran
    Journal of Materials Science, 1998, 33 : 4551 - 4560
  • [4] Optimization of rheological properties of photopolymerizable alumina suspensions for ceramic microstereolithography
    Goswami, Ankur
    Ankit, K.
    Balashanmugam, N.
    Umarji, Arun M.
    Madras, Giridhar
    CERAMICS INTERNATIONAL, 2014, 40 (02) : 3655 - 3665
  • [5] Effect of Acrylate Monomer on the Characteristics of Photopolymerizable Suspensions for Obtaining Ceramic from Stabilized ZrO2
    Ermakova, L. V.
    Kuznetsova, D. E.
    Poplevin, D. S.
    Smyslova, V. G.
    Karpyuk, P. V.
    Sokolov, P. S.
    Dosovitskii, G. A.
    Chizhevskaya, S. V.
    GLASS AND CERAMICS, 2023, 79 (9-10) : 395 - 400
  • [6] Curing of highly loaded ceramic suspensions in acrylates
    Chu, Tien-Min Gabriel
    Halloran, John W.
    1600, American Ceramic Soc, Westerville (83):
  • [7] Curing of highly loaded ceramic suspensions in acrylates
    Chu, TMG
    Halloran, JW
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2000, 83 (10) : 2375 - 2380
  • [8] Effect of Acrylate Monomer on the Characteristics of Photopolymerizable Suspensions for Obtaining Ceramic from Stabilized ZrO2
    L. V. Ermakova
    D. E. Kuznetsova
    D. S. Poplevin
    V. G. Smyslova
    P. V. Karpyuk
    P. S. Sokolov
    G. A. Dosovitskii
    S. V. Chizhevskaya
    Glass and Ceramics, 2023, 79 : 395 - 400
  • [9] Effect of monomers with different functionalities on stability, rheology, and curing behavior of ceramic suspensions
    Lin, Lifu
    Wu, Haidong
    Huang, Zhaoquan
    Wu, Shanghua
    MATERIALS CHEMISTRY AND PHYSICS, 2022, 275
  • [10] Effect of monomers with different functionalities on stability, rheology, and curing behavior of ceramic suspensions
    Lin, Lifu
    Wu, Haidong
    Huang, Zhaoquan
    Wu, Shanghua
    Materials Chemistry and Physics, 2022, 275