Design and Implementation of Reconfigurable CNC System based on Fieldbus

被引：4
|
作者：
Hu, Yi [1 ,2 ]
Yu, Dong [2 ]
Du, Shaohua [1 ,2 ]
Zhang, Xiaohui [1 ,2 ]
Tao, Yaodong [2 ]
Wang, Zhicheng [1 ,2 ]
机构：
[1] Chinese Acad Sci, Grad Univ, Beijing 100039, Peoples R China
[2] Chinese Acad Sci, Natl Engn Res Ctr High End CNC, Shenyang Inst Computing Technol, Beijing 100039, Peoples R China
来源：
2008 INTERNATIONAL CONFERENCE ON INFORMATION AND AUTOMATION, VOLS 1-4 | 2008年
关键词：
Reconfigurable CNC; Open Architecture; Fieldbus; Component; CML;
D O I：
10.1109/ICINFA.2008.4608106
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Conventional CNC system is no longer suited to modern manufacturing system, reconfigurable CNC system has become the research focus recently. This paper introduces a new reconfigurable Fieldbus-based CNC system with an open architecture that offers interoperability and portability, presents the Mechatrolink-II Fieldbus for the CNC system, analyses the implementation by adopting component models in detail, and explicates the CML mechanism for components communication management. Finally, a comparative experiment based on a 4-axis CNC system has been carried out to exhibit the reconfigurable CNC system based on Fieldbus.
引用
收藏
页码：794 / +
页数：2
相关论文
共 50 条
  • [1] Design of open and networked CNC system based on fieldbus
    Tianjin Key Laboratory of Advanced Manufacturing Technologies and Equipments, Tianjin University, Tianjin 300072, China
    不详
    [J]. Tianjin Daxue Xuebao (Ziran Kexue yu Gongcheng Jishu Ban), 2008, 6 (678-684):
  • [2] Design of reconfigurable CNC system based on FPGA
    Li Dongdong
    Wu Liming
    Zhu Gaofeng
    Lai Nanhui
    [J]. ICEMI 2007: PROCEEDINGS OF 2007 8TH INTERNATIONAL CONFERENCE ON ELECTRONIC MEASUREMENT & INSTRUMENTS, VOL IV, 2007, : 857 - 861
  • [3] Design of reconfigurable CNC system based on Embedded Technology
    Xu, Yue
    Wang, Taiyong
    Zhao, Yanju
    Dong, Jingchuan
    [J]. 2008 7TH WORLD CONGRESS ON INTELLIGENT CONTROL AND AUTOMATION, VOLS 1-23, 2008, : 6061 - 6064
  • [4] Design and implementation of waterworks' supervisory system based fieldbus
    Zhang, Sheng
    Wei, Yun
    Shao, Qing
    [J]. Shanghai Ligong Daxue Xuebao/Journal of University of Shanghai for Science and Technology, 2003, 25 (04):
  • [5] Design and Implementation of CNC Controllers using Reconfigurable Hardware
    Dong, Jingchuan
    Yang, Xingzhao
    Liu, Qingjian
    Wang, Zijing
    Wang, Taiyong
    [J]. 2009 IEEE INTERNATIONAL CONFERENCE ON CONTROL AND AUTOMATION, VOLS 1-3, 2009, : 1481 - +
  • [6] The development of a fieldbus-based open-CNC system
    Zhou, ZD
    Xie, JM
    Chen, YP
    Chen, B
    Qiu, ZM
    Wong, YS
    Zhang, YF
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2004, 23 (7-8): : 507 - 513
  • [7] The development of a fieldbus-based open-CNC system
    Z. D. Zhou
    J. M. Xie
    Y. P. Chen
    B. Chen
    Z. M. Qiu
    Y. S. Wong
    Y. F. Zhang
    [J]. The International Journal of Advanced Manufacturing Technology, 2004, 23 : 507 - 513
  • [8] Reconfigurable CNC system based on ARM and DSP
    Tianjin Key Laboratory of Advanced Manufacturing Technologies and Equipments, Tianjin University, Tianjin 300072, China
    [J]. Jilin Daxue Xuebao (Gongxueban), 2008, 4 (848-851):
  • [9] Design of Fieldbus Control System Based on Fieldbus-DP
    Li, Dong
    [J]. PROCEEDINGS OF 2010 INTERNATIONAL CONFERENCE ON INFORMATION TECHNOLOGY AND INDUSTRIAL ENGINEERING, VOLS I AND II, 2010, : 575 - 578
  • [10] Multi-layer monitoring and open CNC system based on fieldbus
    Liu, Qing-Jian
    Wang, Tai-Yong
    Xu, Yue
    Zhi, Jin-Zhang
    Liu, Zhen-Zhong
    [J]. Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition), 2010, 40 (06): : 1589 - 1594
12345