MEMS Heterodyne AMF Detection with Capacitive Sensing

A Lorentz-force actuated cantilever used as a magnetometer detecting alternating magnetic fields (AMF) is described. The device consists of a U-shaped single-crystal silicon cantilever manufactured in SOI technology. This micromachined cantilever features a length of 2 mm, a base width of 90 mu m, and a thickness of 20 mu m, whereat the two 2mm cantilevers are hold together by a 1.5mm long bar at the free moving ends. The cantilever is placed in a vacuum chamber surrounded by a pair of coils configured as Helmholtz coil which generates the alternating magnetic field. The test structures are harmonically excited by the Lorentz force acting on the gold lead at the top surface of the cantilever carrying an alternating current. In the presence of a sinusoidal magnetic flux density, the resulting Lorentz force contains two alternating terms including the sum and difference of current and field frequencies. Therefore, the resonating cantilever is used as mixer in a heterodyne detector for alternating magnetic fields with variable frequency. Resonant excitation only occurs if one of these frequencies is close to a mechanical resonance that satisfies the selection rule imposed by the field configuration. In the experiments, emphasis is laid on the investigation of the first symmetric and first antisymmetric vibration mode, where the amplitude of the vibration is proportional to the exciting vector component of the magnetic field. For this work the harmonic deflection of the cantilever was measured with a capacitive readout system and additionally, with a laser-Doppler vibrometer. By changing the drive current, the operating range of the magnetometer can be varied from a few mu T up to 1mT, whereas the sensitivity remains constant with an uncertainty of less than one percent, valid for both vibration modes. This operation principle of the prototype allows a further miniaturization leading to a spatial resolution of the magnetic field detection determined by the size of the cantilever.