Impact of Circular Saw Blade Design on Forces During Cross-Cutting of Wood

center dot This paper evaluates the impact of the number of saw blade teeth on kinematic and dynamic parameters during cross-cutting of soft and hard woods with mitre saw BOSCH GCM 12 GLD Professional. The forces measured using a three-dimensional XYZ dynamometer Kistler 9257B and subsequent calculation based on a mathematical model were applied in the Ernst-Merchant diagram and the forces acting in the cutting of spruce and oak planks were analysed and compared. The wood cutting was performed by four geometrically and structur-ally similar blades with a 300 mm diameter and with different count of WZ-shaped teeth (z = 26, 36, 48, 60). The optimum saw blade for the given cutting conditions was subsequently assessed by statistical analysis. Unlike many studies researching the cutting resistances in transversal and longitudinal wood cutting, this experiment and force analysis was performed in dependence on the constant feed force.