Optimum Design of Kitchen Garbage Truck Lifting Mechanism Based on Virtual Prototype

被引：0

作者：

Wang, Zhongchang ^{[1
]}

Liu, Dawei ^{[1
]}

Jiang, Rongchao ^{[1
]}

Ge, Xukun ^{[1
]}

机构：

[1] Qingdao Univ, Qingdao, Peoples R China

来源：

ADVANCED MECHANICAL DESIGN, PTS 1-3 | 2012年 / 479-481卷

关键词：

Kitchen garbage truck; Lifting mechanism; ADAMS; Virtual prototype; Optimization;

D O I：

10.4028/www.scientific.net/AMR.479-481.837

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The lifting mechanism's mechanical system and hydraulic system were built by the mechanical system dynamics software ADAMS for improving the mechanism's performance. The hydraulic-mechanical virtual prototype model was established by the integration of the two systems through parameter correlated technology under ADAMS environment. The locations of revolute joints were optimized with the minimum of the cylinder forces as the optimization goal, by using the OPTDES-GRG and the main design points were parameterized. The optimization results show that the maximal cylinder forces had reduced by 16.5% over the non-optimum one, while the lifting force has reduced by 15.7% in the work process of lifting mechanism.

引用

页码：837 / 840

页数：4

共 50 条

[1] Dynamic Characteristics Simulation for Lifting Mechanism of Dump Truck Based on Virtual Prototype
Jiang, Rongchao
Liu, Dawei
Wang, Zhongchang
Fan, Wei
MECHANICAL ENGINEERING AND INTELLIGENT SYSTEMS, PTS 1 AND 2, 2012, 195-196 : 754 - +
[2] Design and Simulating Analysis of Compressed Garbage Transport Truck Lifting Mechanism Based on ADAMS
Xu, Wanhong
Zhang, Chengshuang
Wang, Shouyan
ADVANCES IN DESIGN TECHNOLOGY, VOLS 1 AND 2, 2012, 215-216 : 1224 - +
[3] Virtual Prototype Design and Dynamic Simulation of High-Dump Truck Based on ADAMS
Li, Xurong
Yuan, Dingxin
MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 1882 - 1885
[4] Analysis of the Design of the Hydraulic System of Lifting Mechanism of the Dump Truck
Zhang, Zhedong
2014 2ND INTERNATIONAL CONFERENCE ON ECONOMIC, BUSINESS MANAGEMENT AND EDUCATION INNOVATION (EBMEI 2014), VOL 41, 2014, 41 : 234 - 244
[5] Automotive sunroof motion mechanism design based on virtual prototype
College of Mechanical and Electronic Engineering, Changchun Polytechnic University, Changchun 130012, China
不详
不详
Jixie Gongcheng Xuebao, 2008, 9 (225-229+235):
[6] Optimum analysis on steering rod mechanism of an mine truck based on robust design
Shen, Y., 2005, University of Science and Technology Beijing (27):
[7] Design of The Lifting Mechanism with Virtual Prototyping Technology
Shu, Bin
Xu, Changsheng
Cheng, Dingfang
9TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED INDUSTRIAL DESIGN & CONCEPTUAL DESIGN, VOLS 1 AND 2, 2008, : 384 - 387
[8] Optimum Design for Multi-angle Kitchen Grater Mechanism for Biodegrading Kitchen Waste
Razali, Zol Bahri
Hasim, Abdul Rahim Abdul
Daud, Mohd Hisam
2ND INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2016 (ICONGDM 2016), 2016, 78
[9] Structural Optimum Design of Connecting Rod Type Balance Suspension Based on Virtual Prototype
Liu, Da-wei
Chen, Yang
Wang, Zhong-chang
2015 INTERNATIONAL CONFERENCE ON APPLIED MECHANICS AND MECHATRONICS ENGINEERING (AMME 2015), 2015, : 627 - 632
[10] Optimization design of space adjusting attitude mechanism based on virtual prototype
Lai, YN
Wang, SS
Zhang, GY
PROCEEDINGS OF THE THIRD INTERNATIONAL SYMPOSIUM ON INSTRUMENTATION SCIENCE AND TECHNOLOGY, VOL 1, 2004, : 1170 - 1174

← 1 2 3 4 5 →