Effect of microstructure on the wear behaviour of a dual phase steel

被引：1
|
作者：
Bayram, A [1 ]
Uguz, A [1 ]
机构：
[1] Uludag Univ, Fac Engn & Architecture, TR-16059 Gorukle, Bursa, Turkey
来源：
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK | 2001年 / 32卷 / 03期
关键词：
D O I：
10.1002/1521-4052(200103)32:3<249::AID-MAWE249>3.3.CO;2-F
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study wear behaviour of 0.1% C containing dual phase steels with three different microstructures have been examined. Intercritical annealing, step quenching and intermediate quenching heat treatments have been applied to the alloy in order to obtain different morphologies of ferrite and martensite. It has been observed that, intercritical annealing lead to highest strength but lowest wear resistance in this alloy. Step quenching suggested to have no beneficial effect on tensile properties but increased the wear resistance. Intermediate quenching was found to be the best heat-treatment condition. The fibrous microstructure lead to the optimum tensile strength, ductility and wear resistance in this alloy.
引用
收藏
页码：249 / 252
页数：4
相关论文
共 50 条
  • [1] Effect of prior heat treatment on wear behaviour of 0.23% carbon dual phase steel
    Bhowmick, S.
    Show, B. K.
    [J]. CANADIAN METALLURGICAL QUARTERLY, 2014, 53 (01) : 93 - 99
  • [2] Effect of laser welding on microstructure and mechanical behaviour of dual phase 600 steel sheets
    Mansur, Vinicius Machado
    de Figueiredo Mansur, Raquel Alvim
    de Carvalho, Sheila Medeiros
    Mota de Siqueira, Rafael Humberto
    Fernandes de Lima, Milton Sergio
    [J]. HELIYON, 2021, 7 (12)
  • [3] Combined Effect of Microstructure and Gaseous Environments on Oxidative and Adhesive Wear of Dual-Phase Steel
    Y. Zhang
    A. Jourani
    [J]. Journal of Materials Engineering and Performance, 2021, 30 : 9333 - 9351
  • [4] Combined Effect of Microstructure and Gaseous Environments on Oxidative and Adhesive Wear of Dual-Phase Steel
    Zhang, Y.
    Jourani, A.
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (12) : 9333 - 9351
  • [5] Effect of Intercritical Heat Treatment on the Abrasive Wear Behaviour of Plain Carbon Dual Phase Steel
    Manoj, M. K.
    Pancholi, V.
    Nath, S. K.
    [J]. MICROSTRUCTURE AND TEXTURE IN STEELS AND OTHER MATERIALS, 2009, : 483 - 488
  • [6] The Effect of Microstructure on the Local Wear Behavior of Dual Phase Steels
    Kovacs-Coskun, T.
    Pinke, P.
    [J]. 2ND INTERNATIONAL CONFERENCE ON COMPETITIVE MATERIALS AND TECHNOLOGICAL PROCESSES (IC-CMTP2), 2013, 47
  • [7] The effect of ferrite-martensite morphology on the scratch and abrasive wear behaviour of a dual phase construction steel
    Xu, Xiaojun
    van der Zwaag, Sybrand
    Xu, Wei
    [J]. WEAR, 2016, 348 : 148 - 157
  • [8] EFFECT OF MARTENSITE VOLUME FRACTION ON THE EROSIVE WEAR BEHAVIOUR OF DUAL-PHASE AISI 8620 STEEL
    Dagasan, E.
    Odabas, D.
    Gercekcioglu, E.
    [J]. JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, 2008, 14 (04): : 474 - 481
  • [9] An evaluation of the wear behaviour of a dual-phase low-carbon steel
    Aksoy, M
    Karamis, MB
    Evin, E
    [J]. WEAR, 1996, 193 (02) : 248 - 252
  • [10] Mild oxidative wear behaviour of plain carbon dual-phase steel
    Abouei, V.
    Saghafian, H.
    Kheirandish, Sh.
    Ranjbar, Kh.
    [J]. STEEL RESEARCH INTERNATIONAL, 2007, 78 (06) : 506 - 511
12345