Threshold temperature optical fibre sensors

This paper presents a new approach to manufacture a threshold temperature sensor based on a biconical optical fibre taper. The presented sensor employs the influence of variable state of concentration of some isotropic materials like wax or paraffin. Application of the above- mentioned materials is an attempt to prove that there is a possibility to obtain a low-cost, repeatable and smart sensor working as an in-line element. Optical fibre taper was obtained from a standard single mode fibre (SMF28 (R)) by using a low pressure gas burner technique. The diameter of the manufactured tapers was 6.0 +/- 0.5 mu m with the length of elongation equal to 30.50 +/- 0.16 mm. The applied technology allowed to produce tapers with the losses of 0.183 +/- 0.015 dB. Application of materials with different temperature transition points made it possible to obtain the threshold work at the temperatures connected directly with their conversion temperature. External materials at the temperatures above their melting points do not influence the propagation losses. For each of them two types of the protection area and position of the optical fibre taper were applied. (C) 2016 Elsevier Inc. All rights reserved.